You may also like
25050 Viega MegaPress coupling No stop Smart Connect technology Carbon steel, 1-1/2'' x 1-1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2
- Material Type:
- Carbon Steel
- Product Dimension:
- 1-1/2'' x 1-1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 4.634"
- Product Height:
- 2.437"
- Product Weight:
- 1.124 lbs
- Product Width:
- 2.437"
- Product Material:
- Carbon steel
Viega 25050 – Frequently Asked Questions
1) Is the Viega MegaPress 25050 a press-by-press fitting on both ends, or does one side thread?
Both ends press. The 25050 is listed as a P1 x P2 connection, meaning press on each side, sized 1-1/2 inch by 1-1/2 inch. There is no threaded or grooved end on it, so you press it onto two pieces of 1-1/2 inch carbon steel pipe with a MegaPress jaw and the fitting is done.
2) What does the "no stop" mean on the Viega 25050 MegaPress coupling?
A no-stop coupling has no internal shoulder, so the pipe can slide all the way through the body. That is what you want for a repair or a tie-in where you cannot pull the pipe apart: slide the 25050 fully onto one pipe end, bring the second pipe in, then slide the coupling back so it straddles the joint and press both ends. A standard stop coupling would fight you there because the pipe bottoms out halfway.
3) Can I use the Viega 25050 carbon steel MegaPress coupling on copper or PEX?
No. The 25050 is a carbon steel MegaPress fitting and it is made for carbon steel pipe only. Copper takes a copper press fitting system and PEX takes a PEX system; pressing a carbon steel MegaPress body onto copper tube is not a valid joint. Match the fitting material to the pipe material.
4) What size pipe does the Viega 25050 MegaPress coupling join, and is it a reducer?
It joins 1-1/2 inch to 1-1/2 inch, so it is a straight coupling, not a reducer. If you need to step down from 1-1/2 inch to a smaller size, you need a reducing MegaPress coupling or a reducer fitting instead.
5) What is Smart Connect on the Viega 25050 and why does it matter on a job?
Smart Connect is Viega's feature that lets an unpressed connection leak during pressure testing so the installer can find it before the system goes into service. On a run with a lot of joints, it is the difference between spotting a missed press at test and chasing it behind finished wall later. The 25050 coupling carries it.
How fast can I get the Viega 25050 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25050 come with a warranty?
Absolutely. The Viega 25050 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25050?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25050 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.