You may also like
25311 Viega MegaPressG tee Smart Connect technology Carbon steel, 1'' x 1'' x 1''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x P3
- Material Type:
- Carbon Steel
- Product Dimension:
- 1'' x 1'' x 1''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 5.15"
- Product Height:
- 1.78"
- Product Weight:
- 1.031 lbs
- Product Width:
- 3.465"
- Product Material:
- Carbon steel
Viega 25311 – Frequently Asked Questions
1) Can I use a MegaPressG tee on water lines, or is it gas only?
MegaPressG is the gas-rated line in Viega's carbon steel press family and is intended for gas service. For black iron water, hydronic, compressed air and similar non-gas service on the same pipe sizes, the standard MegaPress carbon steel fittings are the ones to order. The G suffix is the difference, and the two use different sealing elements.
2) How much room do I need to fit a 1 inch MegaPressG tee in a tight chase?
Plan on an overall envelope of 5.15 inches by 3.465 inches by 1.78 inches for the 25311 tee body. On top of that you need clearance for the press jaw to wrap the fitting and rotate, which is typically more than the fitting itself, so measure for the tool before committing to a tight ceiling or chase.
3) What does Smart Connect do on a MegaPressG fitting?
Smart Connect is the sealing element feature on Viega press fittings that deliberately leaks a small amount when the joint is left unpressed, so an unpressed connection shows itself during pressure testing instead of after the wall is closed. On a 1 inch tee with three joints like the 25311, that matters, since all three have to be pressed and one is easy to miss.
4) Do I need a special press jaw for 1 inch MegaPressG?
Yes, MegaPress and MegaPressG use their own jaw set, sized per diameter, and they are not the same jaws used for copper ProPress. For the 1 inch 25311 tee you need the 1 inch MegaPress jaw on a compatible press tool. One jaw size covers all three ends here, since the tee is 1 inch on every outlet.
5) Is the Viega 25311 tee carbon steel or stainless, and will it corrode on an exposed gas line?
The 25311 is carbon steel, matching the black iron pipe it presses onto, and it carries Viega's zinc-nickel coating as supplied. Carbon steel is for dry gas and similar service, not for wet or corrosive environments; for those you would step up to a stainless press fitting instead.
How fast can I get the Viega 25311 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25311 come with a warranty?
Absolutely. The Viega 25311 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25311?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25311 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.