You may also like
25370 Viega MegaPress tee Smart Connect technology Carbon steel, 1-1/2'' x 1-1/2'' x 1''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x P3
- Material Type:
- Carbon Steel
- Product Dimension:
- 1-1/2'' x 1-1/2'' x 1''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 6.87"
- Product Height:
- 2.437"
- Product Weight:
- 1.873 lbs
- Product Width:
- 4.047"
- Product Material:
- Carbon steel
Viega 25370 – Frequently Asked Questions
1) What pipe sizes does the Viega MegaPress 25370 tee connect?
The 25370 is a reducing tee sized 1-1/2 inch x 1-1/2 inch x 1 inch, so the run is 1-1/2 inch on both ends and the branch drops to 1 inch. All three ends are press connections (P1 x P2 x P3), not threaded or grooved, so each one gets pressed with the matching jaw size.
2) Is the MegaPress 25370 tee for black iron pipe or copper?
It is a carbon steel fitting, made for black iron or carbon steel pipe, not copper tube. Copper runs need a copper press fitting instead; pressing a carbon steel body onto copper is the wrong pairing both dimensionally and for the sealing element.
3) Will a 1-1/2 inch MegaPress tee fit in a tight ceiling or wall cavity?
Plan for roughly 6.87 inches of length, 4.047 inches of width and 2.437 inches of height on the fitting body, plus clearance around it for the press tool jaw to close fully. In joisted ceilings and 2x4 walls the jaw swing is usually the limiting factor, not the fitting.
4) What does Smart Connect do on this Viega tee, and why does it matter on a punch list?
Smart Connect is Viega's unpressed-connection feature: a fitting that has been assembled but not pressed leaks visibly during pressure test so the crew can find it before the ceiling closes. On a 1-1/2 x 1-1/2 x 1 inch tee with three separate press joints, that is three chances to miss one, which is exactly where the feature earns its keep.
5) Do I need to thread or weld anything to install the 25370 MegaPress tee?
No cutting oil, no threading, no hot work. All three ends are press connections, so the pipe is cut, deburred, marked for insertion depth, and pressed with the appropriate MegaPress jaw. That is the main reason crews use it in occupied buildings where a hot work permit is a problem.
6) How much does the Viega 25370 tee weigh for support spacing on a carbon steel run?
The fitting weighs 1.873 lbs. Carbon steel press systems still need the pipe supported per code for steel pipe; the press joint is not a structural anchor, so hang the run and do not let the tee or the branch carry the load.
7) Where are Viega MegaPress carbon steel fittings made?
The 25370 MegaPress tee is made in Germany. That matters on public and institutional jobs where country of origin has to be documented in the submittal package.
How fast can I get the Viega 25370 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25370 come with a warranty?
Absolutely. The Viega 25370 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25370?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25370 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.