You may also like
25441 Viega MegaPressG tee Smart Connect technology Carbon steel, 1-1/2'' x 1-1/2'' x 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x FPT
- Material Type:
- Carbon Steel
- Product Dimension:
- 1-1/2'' x 1-1/2'' x 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 6.87"
- Product Height:
- 2.437"
- Product Weight:
- 1.741 lbs
- Product Width:
- 3.189"
- Product Material:
- Carbon steel
Viega 25441 – Frequently Asked Questions
1) What are the three connections on the Viega 25441 MegaPressG tee?
The Viega 25441 is a reducing tee with two 1-1/2 inch press ends on the run and a 3/4 inch female NPT threaded branch. Viega lists the configuration as P1 x P2 x FPT, so the run presses onto 1-1/2 inch black iron or carbon steel pipe while the branch takes a male-threaded 3/4 inch fitting, gauge, valve or drip leg nipple.
2) Can I use a MegaPressG tee on gas line, or is it only for water?
MegaPressG is Viega's gas-rated press system, and the 25441 carbon steel tee is part of that line. The press ends are built to join 1-1/2 inch carbon steel (black iron) gas pipe without threading or welding. Carbon steel is not a potable water material, so this tee belongs on fuel gas piping, not on domestic water.
3) Do I need to thread the 1-1/2 inch pipe to install this Viega tee?
No. The two 1-1/2 inch ends of the 25441 are press ends, so the pipe gets cut, deburred and marked, then pressed with the correct jaw. Only the 3/4 inch branch is threaded (female NPT), so the sole thread sealing you do on this fitting is on that one takeoff.
4) I need a 3/4 inch press branch, not a threaded one. Is this the right tee?
No. On the 25441 the 3/4 inch branch is female threaded, not a press socket, so it will not accept 3/4 inch pipe pressed directly. If your branch run is going to be pressed, you want the all-press 1-1/2 x 1-1/2 x 3/4 MegaPressG tee instead. Use the 25441 where the takeoff is a threaded device or a threaded nipple.
5) What does Smart Connect on the Viega 25441 press tee actually do for me on an inspection?
Smart Connect is the feature in the fitting that lets an unpressed connection leak detectably during pressure testing, so an unpressed joint shows itself before the system is signed off. On a 1-1/2 inch gas main with a 3/4 inch branch tee, that is the difference between finding a missed press at test and finding it after the wall closes.
6) What part number should I give purchasing for a 1-1/2 x 1-1/2 x 3/4 FPT MegaPressG tee?
Viega part 25441. It is the carbon steel MegaPressG tee in 1-1/2 x 1-1/2 x 3/4 inch with the 3/4 inch leg female threaded, and it ships as a single fitting rather than a configurable item, so there are no finish or size options to specify.
How fast can I get the Viega 25441 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25441 come with a warranty?
Absolutely. The Viega 25441 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25441?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25441 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.