You may also like
25480 Viega MegaPress tee Smart Connect technology Carbon steel, 3/4'' x 3/4'' x 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x FPT
- Material Type:
- Carbon Steel
- Product Dimension:
- 3/4'' x 3/4'' x 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 4.528"
- Product Height:
- 1.496"
- Product Weight:
- 0.639 lbs
- Product Width:
- 2.331"
- Product Material:
- Carbon steel
Viega 25480 – Frequently Asked Questions
1) What are the three connections on the Viega 25480 MegaPress tee?
The 25480 is a 3/4 inch tee with two press ends and one female threaded branch, listed as P1 x P2 x FPT. So the run gets pressed onto pipe and the outlet takes a male threaded nipple, valve, or gauge. All three openings are 3/4 inch.
2) Is this Viega tee suitable for potable water lines?
The 25480 is a carbon steel press tee. Carbon steel is used for gas, hydronic heating, compressed air, fire protection and similar non-potable service, not domestic water, where copper or stainless press fittings are the usual choice. If the line is potable, pick a copper or stainless press tee instead of this carbon steel one.
3) What does Smart Connect on a Viega MegaPress fitting actually do for the installer?
Smart Connect is Viega's unpressed-connection feature: an unpressed fitting leaks intentionally during pressure testing so you can find the joint you missed before the system is charged and the walls close up. On the 25480 that applies to the two press ends; the threaded branch is checked the normal way.
4) How much space do I need for a 3/4 inch Viega 25480 press tee in a tight joist bay?
The tee measures 4.528 x 2.331 x 1.496 inches. Allow for the press jaw as well, not just the fitting, since the tool needs clearance around the pipe at each press end before you set the joint.
5) Do I need anything besides the fitting to install the Viega 25480?
The tee ships as the fitting only. You supply the press tool and the correct 3/4 inch MegaPress jaw, plus whatever male threaded component goes into the FPT branch and thread sealant for it. Nothing is included for the threaded leg.
How fast can I get the Viega 25480 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25480 come with a warranty?
Absolutely. The Viega 25480 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25480?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25480 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.