You may also like
25481 Viega MegaPressG tee Smart Connect technology Carbon steel, 3/4'' x 3/4'' x 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x FPT
- Material Type:
- Carbon Steel
- Product Dimension:
- 3/4'' x 3/4'' x 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 4.528"
- Product Height:
- 1.496"
- Product Weight:
- 0.639 lbs
- Product Width:
- 2.331"
- Product Material:
- Carbon steel
Viega 25481 – Frequently Asked Questions
1) Does the Viega 25481 MegaPressG tee have a threaded branch, or is it press on all three ends?
The 25481 is not a straight three-press tee. Its connection type is P1 x P2 x FPT, so the run is two press ends and the branch is female pipe thread. That lets you take a threaded takeoff (drip leg, appliance connector, gas valve) straight out of the branch without adding an adapter. If you need all three ends pressed, this is the wrong fitting.
2) What pipe size does the Viega MegaPressG 25481 tee fit?
It is a 3/4 inch x 3/4 inch x 3/4 inch tee, so the two press ends go on 3/4 inch black iron pipe and the branch is 3/4 inch female thread. No reducing on any leg.
3) Can I use the Viega 25481 tee to branch off an existing 3/4 inch black iron gas line without threading pipe?
That is the point of it. Cut the 3/4 inch line, slide the two press ends on, press them, and you have a 3/4 inch female threaded branch ready for a valve or appliance drop. No pipe threading, no cutting oil, no open flame on the joint. You do need the matching press tool and 3/4 inch MegaPress jaw, which is not part of the fitting.
4) Is the Viega 25481 tee carbon steel or stainless?
Carbon steel. That matches it to black iron gas pipe runs, which is what MegaPressG is built around. For stainless or copper tube systems you want a different Viega press system, not this fitting.
5) How much room do I need to fit the Viega 25481 MegaPressG tee in a tight mechanical space?
The fitting measures 4.528 inches long, 2.331 inches wide and 1.496 inches high. Plan clearance beyond that for the press jaw to wrap the end, which is usually the real constraint in a joist bay or against a wall rather than the fitting body itself.
6) What is Smart Connect on the Viega MegaPressG 25481 and why does it matter on a gas line?
Smart Connect is a feature of the sealing element that deliberately leaks on an unpressed connection during pressure testing, so a joint you missed shows itself before the system goes into service. On a fuel gas run that is the difference between finding the fitting at test and finding it later.
7) Where is the Viega 25481 MegaPressG tee made, and how much does it weigh for a submittal?
Made in Germany, and it weighs 0.639 lbs. Both are the lines procurement and spec reviewers usually want for country-of-origin and shipping documentation.
How fast can I get the Viega 25481 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25481 come with a warranty?
Absolutely. The Viega 25481 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25481?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25481 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.