You may also like
25606 Viega MegaPressG adapter Smart Connect technology Carbon steel, 1-1/2'' x 1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P x FPT
- Material Type:
- Carbon Steel
- Product Dimension:
- 1-1/2'' x 1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Adapters
- Product Type:
- Tee
- Product Length:
- 3.717"
- Product Height:
- 2.437"
- Product Weight:
- 0.827 lbs
- Product Width:
- 2.437"
- Product Material:
- Carbon steel
Viega 25606 – Frequently Asked Questions
1) What kind of connections does the Viega 25606 MegaPressG fitting have?
It's a P x FPT fitting: one press end that crimps onto the pipe with a press tool, and one female pipe thread end that takes a male-threaded nipple, valve or appliance connector. Sizes are 1-1/2 inch by 1/2 inch, so the press side is the large end and the threaded side is the small one.
2) What pipe is the Viega 25606 MegaPressG fitting made to press onto?
The body is carbon steel, and MegaPressG is Viega's press system for black iron / carbon steel pipe on gas lines. Pressing it onto copper or stainless is not what this fitting is for; those lines take Viega's copper or stainless press systems instead.
3) Does the Viega 25606 have Smart Connect, and what does that do on a press fitting?
Yes, 25606 is a Smart Connect fitting. That feature lets an unpressed connection leak during pressure testing so the installer can find any joint that got missed before the system goes into service. It does not change how the fitting is pressed.
4) How much room do I need to fit a Viega 25606 press fitting in a tight bay?
The fitting measures 3.717 inches long by 2.437 inches high by 2.437 inches wide, and weighs 0.827 lbs. Plan clearance beyond that for the press tool jaw, which needs to swing square around the press end.
5) Do I need to thread or weld the 1-1/2 inch side of the Viega 25606?
No. The 1-1/2 inch end is a press connection, so the pipe gets cut, deburred, marked for insertion depth and pressed with a compatible press tool and jaw. No threading, no cutting oil, no torch. Only the 1/2 inch female threaded side needs a threaded mate and pipe sealant rated for the service.
6) Is the Viega 25606 a domestic or imported fitting?
It's made in Germany. Worth knowing up front on public or institutional work where the spec carries a domestic-sourcing requirement, since this one will not satisfy it.
How fast can I get the Viega 25606 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25606 come with a warranty?
Absolutely. The Viega 25606 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25606?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25606 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.