You may also like
28715 Viega MegaPressG tee Smart Connect technology Carbon steel, 4'' x 4'' x 2-1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x P3
- Material Type:
- Carbon Steel
- Product Dimension:
- 4'' x 4'' x 2-1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 11.102"
- Product Height:
- 5.193"
- Product Weight:
- 6.325 lbs
- Product Width:
- 7.476"
- Product Material:
- Carbon steel
Viega 28715 – Frequently Asked Questions
1) What size branch does the Viega MegaPressG 28715 tee reduce to?
The MegaPressG 28715 is a 4 inch x 4 inch x 2-1/2 inch tee, so the run stays full 4 inch and the branch outlet drops to 2-1/2 inch. All three ends are press connections (P1 x P2 x P3), so you are pressing onto pipe at each outlet rather than threading or welding a branch takeoff.
2) Is the Viega 28715 tee steel or copper, and what does that mean for the system it goes in?
Carbon steel. The 28715 MegaPressG tee is built for black iron / carbon steel pipe systems, not copper tube. If your run is copper you need a copper press fitting instead, since the press profile and seal are matched to the pipe material.
3) Do I need a special press tool for a 4 inch MegaPressG fitting?
Yes. A 4 inch carbon steel press fitting is outside the range of standard jaws, so it takes a press tool with the large-diameter actuator and the correct 4 inch ring for MegaPressG. Confirm your tool covers 4 inch carbon steel before scheduling the tie-in; the 2-1/2 inch branch also falls in the ring range rather than the jaw range.
4) What is Smart Connect on the Viega 28715 tee and why does it matter on a gas job?
Smart Connect is the feature that makes an unpressed connection detectable: at pressure test an unpressed fitting leaks noticeably, so it flags itself before the system is signed off. On a large branch fitting like this 4 inch x 4 inch x 2-1/2 inch tee, where three separate presses have to be made, that is the safeguard against one missed press on a joint you may not be able to reach again once the ceiling closes.
5) How do I order the exact Viega 4 x 4 x 2-1/2 gas press tee?
Order by Viega part number 28715. That single number covers the 4 inch x 4 inch x 2-1/2 inch MegaPressG carbon steel tee, with no finish or seal options to specify.
6) Where is the Viega 28715 MegaPressG tee manufactured?
Made in Germany. That matters for submittals on institutional and government work where country of origin has to be declared on the product data sheet.
How fast can I get the Viega 28715 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 28715 come with a warranty?
Absolutely. The Viega 28715 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 28715?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 28715 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.