You may also like
2H JMPR BRD ASY3 900 H9/16 F1.5 L12
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Insulation Material:
- Non-Insulated
- Product Group:
- Grounding & Bonding
- Product Net Depth Length:
- 12 in304.8 mm
- Product Type:
- Extra-Flexible Jumper Braid
- Selling Unit Of Measure:
- each
- Standards:
- NEMA
- Type2:
- Grounding devices or assemblies
- Department:
- Electrical
- Product Subgroup:
- Grounding Devices
Blackburn FBE2H090A1-12 – Frequently Asked Questions
1) What is the overall length of the Blackburn FBE2H090A1-12 jumper braid?
The FBE2H090A1-12 bonding jumper braid is 12 inches (304.8 mm) long. That is the finished assembly length, so measure your bonding path between the two attachment points before ordering; a braid that is too short forces a strained bend at the terminal, and an over-long one has to be looped where it can be snagged.
2) Is the Blackburn FBE2H090A1-12 braid insulated?
No. It is a non-insulated extra-flexible braid, bare conductor end to end. That is normal for an equipment bonding jumper, but it means you need to keep it clear of energized parts and away from anything it could short across in a crowded enclosure or gutter.
3) Why use a flexible braid jumper instead of a piece of solid or stranded bonding wire?
An extra-flexible braid is what you reach for when the two bonded parts move relative to each other, or when you need to make up a bond in a tight space without fighting the conductor. Hinged enclosure doors, equipment on vibration isolators, expansion joints in raceway, and bus connections all flex; a solid or stranded conductor work-hardens and eventually cracks at the termination. The FBE2H090A1-12 is a made-up assembly with the terminals already attached, so there is no crimping or lug work at the point of install.
4) Does the Blackburn FBE2H090A1-12 come as a complete assembly, or do I have to terminate it myself?
It ships as a finished grounding assembly, sold each. The braid and its terminals come as one made-up part, so the install is bolt one end, bolt the other. Nothing else is supplied with it, so hardware to land the terminals is on you.
5) Does the Blackburn FBE2H090A1-12 jumper braid meet NEMA standards, and is it US made?
NEMA is the standard cited for this braid, and country of origin is the United States. For agencies and institutional buyers with domestic-sourcing language in the spec, that origin is the part worth capturing on the submittal.
6) What is the exact Blackburn part number to order for this 12 inch bonding braid?
Order Blackburn FBE2H090A1-12. That is the manufacturer part number for the 12 inch non-insulated extra-flexible jumper braid assembly, and it is the number to put on a purchase order or a distributor cross reference so you get the right hole size and terminal configuration rather than an adjacent length in the FBE family.
How fast can I get the Blackburn FBE2H090A1-12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn FBE2H090A1-12 come with a warranty?
Absolutely. The Blackburn FBE2H090A1-12 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn FBE2H090A1-12?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn FBE2H090A1-12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.