You may also like
2X2X3/4 BLK MI TEE
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- End Conn Size 3:
- FPT
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 2
- Size 2:
- 2
- Size 3:
- 0.75
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Finish:
- Black
- Product Material:
- Malleable Iron
- Product Weight:
- 1.87 lbs
ASC Engineered Solutions 310049408 – Frequently Asked Questions
1) What size openings does the 2 x 2 x 3/4 black malleable iron tee have?
It's a reducing tee: the run is 2 inch on both ends and the branch outlet is 3/4 inch. All three openings are female pipe thread (FPT), so pipe or nipples thread into the fitting on every port. Use it where you need to pull a 3/4 inch branch off a 2 inch line without adding a bushing.
2) Will this malleable iron tee thread onto standard black steel pipe?
Yes. The threads are cut to ASME B1.20.1, which is standard NPT taper pipe thread, so it mates with any threaded black steel or galvanized steel pipe and nipples of matching size. Dope or tape the male threads as usual.
3) Is this black iron tee approved for use on a fire sprinkler system?
It carries UL/FM approval, so it can be used on fire protection piping where the design calls for UL Listed and FM Approved threaded malleable iron fittings. It's a standard-weight (STD) class fitting rated per ASME B16.3.
4) Can a black malleable iron tee be used on a potable water line?
No. Black malleable iron is for gas, fire protection, air, and similar non-potable service. The black finish is a mill coating with no corrosion protection against water, which is why galvanized fittings are specified for water lines. For potable water, use a galvanized or brass fitting instead.
5) What material spec does this ASC Engineered Solutions tee meet?
The casting is malleable iron to ASTM A-197, with dimensions and pressure class to ASME B16.3. Those are the two lines a mechanical spec or submittal usually asks for on threaded black iron fittings.
6) Do I need a bushing to get from 2 inch pipe down to a 3/4 inch branch?
Not with this fitting. The 2 x 2 x 3/4 tee reduces at the branch outlet itself, so the 3/4 inch takeoff threads straight into the tee. Using a full-size 2 x 2 x 2 tee plus a 2 x 3/4 bushing gets you to the same place but adds a joint and a leak path.
7) What is the manufacturer part number for this ASC reducing tee?
The ASC Engineered Solutions part number is 310049408, for the 2 x 2 x 3/4 black malleable iron tee.
How fast can I get the ASC Engineered Solutions 310049408 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 310049408 come with a warranty?
Absolutely. The ASC Engineered Solutions 310049408 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 310049408?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 310049408 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.