Spears PVC DWV Double 1/4 Bend...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$9.91
Spears PVC DWV Double 1/4 Bend Elbow, Hub x Hub x Hub

Spears PVC DWV Double 1/4 Bend Elbow, Hub x Hub x Hub

(No reviews yet) Write a Review

Model: P327-020

In Stock (leaves warehouse same day if ordered before 3pm ET)

$9.91
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Spears PVC DWV Double 1/4 Bend Elbow, Hub x Hub x Hub

The Spears PVC DWV Double 1/4 Bend Elbow is a 3" hub x hub x hub fitting engineered for drain, waste, and vent (DWV) piping systems. Molded from durable PVC, this double 1/4 bend combines two 90° quarter-bend turns into a single fitting, allowing installers to create smooth directional offsets while maintaining proper drainage flow and minimizing the number of joints required in a run. Each unit ships 15 each per pack, making it a practical choice for both new plumbing installations and repair or renovation work where consistent, code-compliant DWV fittings are needed.

Key Features

  • Trade Size: 3" sizing for standard drain, waste, and vent piping applications.
  • Durable Construction: Molded PVC material provides a lightweight, corrosion-resistant fitting that resists the chemical and moisture exposure typical of DWV systems.
  • Hub x Hub x Hub Connections: Three hub connection points allow for solvent-welded joints on all sides, simplifying assembly with standard PVC DWV pipe.
  • Double 1/4 Bend Configuration: Two 90° quarter-bend turns are combined into one fitting, reducing joint count while achieving the directional change needed in a DWV run.
  • Packaging: Supplied 15 each per pack for efficient stocking and job-site distribution.

Technical Specifications

  • Product Type: Elbow
  • Material: PVC
  • Configuration: Double 1/4 Bend (90°)
  • Connections: Hub x Hub x Hub
  • Trade Size: 3"
  • Department: Plumbing
  • Product Group: PVC & CPVC Fittings
  • Packaging: 15 ea per pack

Typical Applications

  • Drain, Waste, and Vent (DWV) Piping Systems
  • Residential and Commercial Plumbing Installations
  • Directional Offsets and Piping Transitions
  • Bathroom, Kitchen, and Utility Drain Line Routing
  • Renovation and New Construction Plumbing Projects

Why Spears?

Spears PVC DWV fittings are built from durable PVC material and designed with precise hub x hub x hub connections for reliable, consistent solvent-welded joints. The double 1/4 bend configuration helps installers reduce fitting count while maintaining proper drainage slope, supporting dependable, code-compliant performance for professional plumbing work.

Product Specs

Product Type:
Elbow
Department:
Plumbing
Product Group:
PVC & CPVC Fittings
Product Material:
PVC
Angle:
90°
Connection Type:
Hub
Product Subgroup:
Pipe Fittings

Spears P327-020 – Frequently Asked Questions

1) Will a Spears P327 double 1/4 bend fit 3 inch PVC DWV pipe?
Yes. The P327 double 1/4 bend is a hub fitting, so all three openings socket over the outside of standard PVC DWV pipe and get solvent welded. It comes in 2 inch (P327-020) and 3 inch (P327-030) trade sizes, so pick the one matching your pipe size. Hub means no threading and no glue-on adapter, just cleaned and primed pipe into the socket.
2) What is a double 1/4 bend used for in a DWV system?
A double 1/4 bend is two 90 degree quarter bends cast into one body with three hub openings, so one fitting turns the line and takes a second inlet at the same point. In practice it is what you reach for on back-to-back fixtures, a pair of drains coming into one drop, or a directional offset where you would otherwise glue up two separate elbows. Fewer joints in the run means fewer places to leak and fewer fittings to align. If you only need a single change of direction, a plain 1/4 bend elbow is the cheaper and shorter fitting.
3) Do I need primer and cement to install a hub PVC DWV bend, or is anything included?
The fitting ships as the bend alone. Hub sockets are solvent weld, so you supply the PVC primer and DWV-rated solvent cement, plus a rag and a deburring tool for the pipe ends. No gaskets, no nuts, no clamps are part of a hub fitting. Budget the cement and primer into the job when you order.
4) Can I use a double 1/4 bend to keep proper slope on a horizontal drain run?
Two 90 degree turns in one body is a vertical-change fitting, not a way to add fall. It gets you the directional change with one glue-up instead of two while you hold your grade with the pipe itself, typically 1/4 inch per foot on 2 and 3 inch waste. If you are turning a horizontal line into a horizontal line and need drainage-pattern flow rather than a hard 90, a long sweep or a combination wye and 1/8 bend is the better fitting.
5) Which Spears part number do I order for a 3 inch DWV double 1/4 bend?
P327-030 is the 3 inch, and P327-020 is the 2 inch. Both are Spears hub x hub x hub double 1/4 bends. Distributors matching a bid should quote by that MPN, since the P327 base number covers both sizes.
6) How many Spears double 1/4 bends come in a pack?
The P327 double 1/4 bend is supplied 15 each per pack. That matters if you are stocking a van or a shop shelf rather than buying one fitting for a single repair, so plan your count in multiples of 15.
7) Will a PVC double 1/4 bend hold up in a commercial drain line?
PVC is corrosion resistant and unaffected by the moisture and household chemical exposure a waste line sees, which is why it is standard for commercial and multi-family DWV work. It is a rigid molded body with no moving parts and no metal to rust out. What it will not take is continuous high heat, so a boiler blowdown or a commercial dishwasher discharge running hot needs a different material.
How fast can I get the Spears P327-020 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Spears P327-020 come with a warranty?
Absolutely. The Spears P327-020 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Spears P327-020?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Spears P327-020 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!