Spears PVC DWV 1/16 Bend Hub x...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3.05
Spears PVC DWV 1/16 Bend Hub x Hub Elbow Fitting

Spears PVC DWV 1/16 Bend Hub x Hub Elbow Fitting

(No reviews yet) Write a Review

Model: P324-015

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3.05
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Spears PVC DWV 1/16 Bend Hub x Hub Elbow Fitting

The Spears PVC DWV 1/16 Bend Hub x Hub Elbow Fitting is a solvent-weld PVC fitting engineered for Drain, Waste, and Vent (DWV) piping systems, available across a size range of 1-1/2", 2", 3", 4", 6", and 8" to match a wide variety of project requirements. Built from PVC for long-term corrosion and chemical resistance, this bend fitting provides a hub (socket) connection on both ends, allowing a clean directional change in DWV runs without the need for threaded or mechanical joints. Consistent across the size range, it is well suited for contractors and installers who need reliable, code-compliant DWV fittings on hand for plumbing rough-in, renovation, and repair work.

Key Features

  • Trade Size Range: Available in 1-1/2", 2", 3", 4", 6", and 8" sizes to fit a range of DWV piping runs.
  • Durable Construction: Manufactured from PVC for corrosion resistance and long service life in drain, waste, and vent applications.
  • 1/16 Bend Configuration: Provides a gradual directional change in DWV piping runs, helping maintain proper drainage flow.
  • Hub x Hub Connections: Both ends are hub (socket) style for solvent-weld joints, simplifying assembly with standard PVC DWV pipe.
  • DWV-Specific Design: Purpose-built for Drain, Waste, and Vent systems rather than pressure piping applications.
  • Contractor-Ready Packaging: Packaged for efficient bulk handling on job sites and in stockrooms.
  • Lightweight PVC Material: Easy to handle, cut, and solvent-weld compared to metallic fitting alternatives.

Technical Specifications

  • Product Material: PVC
  • Product Type: Elbow
  • Trade Size Range: 1-1/2" - 8"
  • Connection Type: Solvent Weld, Hub x Hub
  • Configuration: 1/16 Bend

Typical Applications

  • Residential and Commercial Drain, Waste, and Vent (DWV) Systems
  • Below-Grade and Above-Grade Drainage Piping
  • New Construction Plumbing Rough-In
  • Plumbing Renovation and Repair Projects
  • PVC DWV Pipe Directional Changes
  • Multi-Size Jobsite Stocking for DWV Rough-In Crews

Why Spears?

Spears is a recognized manufacturer of PVC and CPVC piping system components, and this DWV 1/16 bend family reflects that focus with durable PVC construction and hub x hub solvent-weld connections designed for reliable, code-compliant drainage installations across the full 1-1/2" through 8" size range. Choosing Spears fittings for DWV systems helps ensure consistent fit-up with standard PVC DWV pipe and fittings across a project, whether the work calls for a compact 1-1/2" branch connection or a larger 8" main drainage run. Stocking the complete Spears 1/16 bend size range gives contractors a single trusted source for directional changes throughout a DWV system.

Product Specs

Product Type:
Elbow
Department:
Plumbing
Product Group:
Plumbing Fittings
Product Material:
PVC
Connection Type:
Solvent Weld
Configuration:
Hub x Hub 1/16 Bend
Product Subgroup:
Elbows
Product Size:
1-1/2" - 8"

Spears P324-015 – Frequently Asked Questions

1) What kind of joint does this Spears bend use, and do I need glue?
Both ends are hub (socket) connections for solvent weld, so yes, the joint is made with PVC primer and cement, not threads and not a gasket. You cut the pipe square, deburr, prime, cement, and set the fitting. No mechanical couplings or threaded adapters are involved anywhere in the joint.
2) Will a Spears DWV bend glue up to another brand's PVC DWV pipe and fittings?
Yes. The hubs are sized to standard PVC DWV pipe, so the fitting takes any PVC DWV pipe of the matching trade size regardless of who made the pipe. What has to match is the material and the system: PVC DWV pipe into a PVC DWV socket. Do not try to solvent weld it to ABS or to cast iron; those need a transition coupling instead.
3) What sizes does the Spears PVC DWV 1/16 bend come in?
Six trade sizes: 1-1/2 inch, 2 inch, 3 inch, 4 inch, 6 inch, and 8 inch. That covers a 1-1/2 inch lav or branch line up through an 8 inch building main, so a rough-in crew can stock one family of bends for the whole job.
4) What is the Spears part number for a 4 inch DWV 1/16 bend?
The 4 inch is P300-040. The 2 inch is P300-020 and the 3 inch is P300-030; the 1-1/2 inch, 6 inch, and 8 inch fall under the P324 designation as P324-015, P324-060, and P324-080. Quote the number for the trade size you are running so you do not get a 1/8 bend by mistake.
5) Should I use a 1/16 bend or a 1/8 bend on my drain line?
Depends how much you need to turn. The 1/16 bend is 22-1/2 degrees, so it is the fitting for shallow offsets and gentle jogs around framing or structure while keeping the drain flowing. A 1/8 bend turns 45 degrees and is what you reach for on a standard offset or to feed into a wye. Two 1/16 bends stacked give you the same 45 degrees with a longer, easier sweep if you have the room.
6) Can this PVC bend go underground on a below-grade drain line?
Yes, it is used on both below-grade and above-grade drainage piping. The PVC body resists corrosion and chemical attack, which is why it holds up in buried waste lines where metal fittings would eventually give out. Bed and backfill it the way you would the rest of the buried run.
7) Is this a vent fitting or a drain fitting?
Both. DWV stands for drain, waste, and vent, and this 1/16 bend is used anywhere in that system, whether it is turning a horizontal waste run, offsetting a stack, or jogging a vent through framing. Same fitting, same solvent weld joint either way.
How fast can I get the Spears P324-015 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Spears P324-015 come with a warranty?
Absolutely. The Spears P324-015 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Spears P324-015?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Spears P324-015 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!