You may also like
Thomas & Betts 4970/4971 Cord Connector-90 Degree, Polyamide (PA), Black
Model: TB-4970NM-2
Cord Connectors-90 Degree
Features
Reduced overall size, fits into tighter spaces.
Gland nut designed to restrict cable bending.
Suitable for Ordinary, Wet or Dry locations.
Extended range with...
Thomas & Betts
$3,617.41
3/4 90 DEG RANGER CORD FITT.31-.56
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Type:
- 90 Degree Cord Connector
- Department:
- Electrical
- Product Color:
- Metallic
- Product Material:
- Malleable Iron
- Product Group:
- Wiring Devices
- Product Subgroup:
- Cord Grips
Thomas & Betts 4971 – Frequently Asked Questions
1) What cord diameter range does the Thomas & Betts 4971 cord connector clamp?
The 4971 Ranger cord fitting takes cord with an outside diameter of .31 to .56 inches. Measure the jacket OD on your SO/SJ cord before ordering; anything under .31 or over .56 will not seal or grip properly in this body.
2) Why use a 90 degree cord connector instead of a straight one?
The 4971 is a 90 degree cord connector, which turns the cord at the enclosure so it drops straight down the wall or runs flat against it instead of standing proud of the box. That matters where there is no clearance behind a machine or panel, and it keeps the cord from taking a sharp bend right at the strain relief. If you have room for the cord to leave the box in line with the hub, a straight fitting is the simpler choice.
3) Is the Thomas & Betts 4971 cord grip metal or plastic?
Malleable iron body, metallic finish. That is the one to use on machine tools, pendant drops and industrial enclosures where a nylon fitting would get knocked off; it also carries the mechanical abuse better than die cast.
4) Will a 4971 cord grip work for a 14/3 SJ power cord on a piece of shop equipment?
Check the jacket OD rather than the wire gauge. The fitting grips .31 to .56 inch cord, which covers most 16/3 through 14/3 portable cord, but jacket diameter varies by cord type and manufacturer. Caliper the cord at the jacket and match it to that window.
5) What part number do I order for the Thomas & Betts 3/4 inch 90 degree Ranger cord fitting?
Order Thomas & Betts 4971. That is the 3/4 inch, 90 degree Ranger cord fitting for .31 to .56 inch cord, and it is sold as a single fitting rather than a kit.
How fast can I get the Thomas & Betts 4971 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts 4971 come with a warranty?
Absolutely. The Thomas & Betts 4971 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts 4971?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts 4971 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.