Metallics JRM116SLT 3/8-16 x 2...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JRM116SLT 3/8-16 x 2 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JRM116SLT 3/8-16 x 2 in. Round Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRM116SLT
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
3/8-16 x 2 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • Round head with slotted Drive
    • 3/8-16 Diameter, 2" Length

  • Additional Notes

    • In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s! | Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.237 - 0.256 in.
Fastener Head Type:
Round
Fastener Head Width:
0.67 - 0.708 in.
Fastener Length:
2
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
7.25 in
Product Length:
4.5 in
Product Weight:
6.54 lbs
Product Width:
4.5 in
Recess Penetration Gaging Depth:
0.182 - 0.208
Slot Depth:
0.117 - 0.155
Slot Width:
0.081 - 0.094
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
16
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRM
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JRM116SLT – Frequently Asked Questions

1) Will a Metallics JRM116SLT machine screw thread into a 3/8-16 tapped hole or standard 3/8-16 nut?
Yes. The JRM116SLT is a 3/8-16 machine screw, 16 threads per inch, which is the standard 3/8 inch UNC coarse thread. It mates with any 3/8-16 tapped hole, nut, or strut channel nut. Usable grip is limited by the 2 inch screw length.
2) Can I use zinc plated steel machine screws like these outdoors?
The JRM116SLT is zinc plated carbon steel, which is a mild indoor and protected-location finish. It handles damp interiors and covered exteriors, but in direct weather, coastal air, or wash-down areas the plating sacrifices and the steel underneath rusts. For those openings specify a stainless 3/8-16 round head machine screw instead.
3) Are these Metallics screws strong enough for structural or high-load use?
Rated 60,000 psi minimum tensile with a hardness of Rockwell B70 to B100, made from AISI 1006 to 1022 low carbon steel. That is a standard low carbon machine screw, comparable to unhardened commercial grade, fine for fixtures, panels, boxes, covers and general MRO work. It is not a Grade 5 or Grade 8 cap screw, so do not substitute it where a drawing calls for a high strength bolt.
4) How are the Metallics JRM116SLT screws packaged and what is the minimum order?
They ship in a jar, with a minimum of 100 count. The packed jar weighs 6.54 lbs.
5) Do these 3/8-16 machine screws come with nuts or washers?
No. The JRM116SLT is a bare machine screw only, supplied as a 100 count jar. If you are not threading into a tapped hole you need to order 3/8-16 hex nuts and any flat or lock washers separately.
6) Do the Metallics JRM116SLT screws meet Buy American or ARRA requirements on a federal job?
Metallics lists the JRM116SLT as compliant for both Buy American and ARRA. Country of origin is China, so on a project with a domestic-content clause stricter than the standard compliance flag, verify against your specific contract language.
7) Is a round head slotted machine screw the right choice, or should I use a flat head?
Round head sits on top of the surface and spreads load over a 0.67 to 0.708 inch bearing face, so it works where you have an untapered through hole and no need for a flush surface. Use a flat head instead when the hole is countersunk or the screw has to finish flush, and a pan or truss head when you need a lower profile than the 0.237 to 0.256 inch this head stands up.
How fast can I get the Metallics JRM116SLT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRM116SLT come with a warranty?
Absolutely. The Metallics JRM116SLT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRM116SLT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRM116SLT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!