You may also like
IDEAL Industries 85-075 3GHz, 75Ω BNC Female-to-Female Splice Adapter -2 pk
Model: IDL-85-075
3GHz, 75Ω BNC Female-to-Female Splice Adapter -2 pk
Features
For 75Ω applications up to 3GHz
Reusable, non-permanent connection - no tools required
Nickel plated brass body, gold plated round center...
Ideal Industries
$55.88
$5.71
3GHz, 75Ω BNC Female-to-Female Splice Adapter
Related Products
- InSITE™ RTQ™ RG-6 BNC Compression
- InSITE™ RG-59 BNC Compression
Features
- For 75Ω applications up to 3GHz
- Use the 3GHz BNC Splice Adapter to extend coaxial cable runs for CCTV and other video applications using BNC connectors. The adapter joins two shorter length cables into a longer cable without having to install a new cable. The BNC adapter is a high performance product rated for operation up to 3GHz. The nickel plated, brass body has a gold plated round contact pin for low signal loss. Designed for 75Ω coaxial cables. Both ends of the BNC adapter are female ports. Male BNC plugs mate with each end of the adapter. Simply attach male BNC connectors to both ends of the splice to join the cables together.
- Accepts male BNC connectors on both sides
- Connector Model: 75BNCFF
- Nickel plated brass body, gold plated round center pin contact
- Reusable, non-permanent connection - no tools required
- For extending or combining shorter BNC cables into longer cables
Manufacturer Resources
Product Specs
- Product Group:
- Wire Connectors & Terminals
- Department:
- Electrical
- Product Subgroup:
- Wire Connectors
- Qty:
- Card of 10
- parent sku:
- IDL-92-817P
- Product Type:
- Splice
Ideal Industries 92-817P – Frequently Asked Questions
1) Will the IDEAL 92-817P BNC splice work for a 1080p or 4K HD-over-coax CCTV run?
The 92-817P is rated for operation up to 3GHz on 75 ohm coax, which covers HD-over-coax video bandwidth well past standard analog CCTV. It is built specifically for 75 ohm cable, so it suits video, not 50 ohm RF work. The gold plated round center pin contact and nickel plated brass body are there to keep insertion loss low at those frequencies.
2) Can I join two shorter coax camera cables instead of pulling a new one?
That is exactly what the 92-817P splice adapter is for. Put a male BNC connector on the end of each cable, thread one into each side of the adapter, and the two runs become one longer run with no new cable pull. The connection is reusable and non-permanent, and no tools are needed to make or break it.
3) Is the IDEAL 92-817P male or female on the ends?
Both ends are female BNC ports, so it mates with male BNC plugs on each side. If your cables already terminate in female jacks, this adapter will not couple them, you would need a male-to-male barrel instead.
4) What connectors should I use on the cable ends to land into this BNC splice?
You need male BNC connectors crimped or compressed onto each cable end. IDEAL's own compression connectors pair with it: InSITE RTQ RG-6 BNC compression for RG-6 cable and InSITE RG-59 BNC compression for RG-59. Both are 75 ohm video connectors, matching the adapter's 75 ohm design.
5) How many BNC splices come in a pack of the IDEAL 92-817P?
It ships as a card of 10 adapters, which is the usual way an integrator buys them for a multi camera job rather than one at a time.
6) Can I use this BNC splice on a 50 ohm antenna or two-way radio feed?
No. The 92-817P is designed for 75 ohm coaxial cable, which is the video and CATV impedance. Dropping a 75 ohm adapter into a 50 ohm RF path creates an impedance mismatch; use a 50 ohm BNC coupler for radio and instrumentation work.
7) What is the exact part number and connector model for this IDEAL BNC female-to-female adapter?
Order it as IDEAL Industries 92-817P. The connector model designation printed in IDEAL's data is 75BNCFF, which reads as 75 ohm BNC female-female.
8) Do I need a crimper or any tool to install the 92-817P splice?
No tool touches the adapter itself, the connection threads together by hand and can be taken apart and reused. You will still need the appropriate compression or crimp tool to put the male BNC ends on the cable before it goes in.
How fast can I get the Ideal Industries 92-817P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ideal Industries 92-817P come with a warranty?
Absolutely. The Ideal Industries 92-817P is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ideal Industries 92-817P?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Ideal Industries 92-817P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.