You may also like
3X3X2 BLK MI TEE
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- End Conn Size 3:
- FPT
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 3
- Size 2:
- 3
- Size 3:
- 2
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Finish:
- Black
- Product Material:
- Malleable Iron
- Product Weight:
- 5.7 lbs
ASC Engineered Solutions 310054606 – Frequently Asked Questions
1) Is this black malleable iron tee approved for fire sprinkler piping?
It carries UL/FM approval, which is the listing fire protection contractors and AHJs look for on threaded sprinkler fittings. It is standard weight malleable iron with a black finish, which is the usual choice for wet sprinkler mains and branch lines rather than galvanized.
2) Will this reducing tee drop straight into an existing 3 inch threaded black iron run?
Yes, provided the existing fittings are also cut to ASME B16.3 dimensions and NPT threads, which is the norm for threaded black iron. Laying length and thread engagement follow B16.3, so it interchanges with any other B16.3 standard-weight 3x3x2 tee. You will still need to break the line and use a union or swing joint to get it in, since a threaded tee cannot be rotated into place between two fixed ends.
3) Can I use a black malleable iron tee on a potable water line?
No. Black malleable iron is for gas, fire protection, steam, and compressed air service. For potable water you want galvanized or a copper/brass fitting, since unprotected black iron will rust in a domestic water line. The black finish on this 3x3x2 tee is the giveaway.
4) Do I need a bushing to get a 2 inch branch off this tee?
No bushing needed. The branch on this tee is already 2 inch FPT, so the reduction is built into the fitting. Using a reducing tee instead of a 3x3x3 tee plus a 3x2 bushing gives you one less joint to seal and is generally what a sprinkler or gas inspector prefers to see.
5) What is the part number for the ASC Engineered Solutions 3x3x2 black tee?
The manufacturer part number is 310054606 from ASC Engineered Solutions. That is the one to quote when you are matching an existing submittal or restocking a jobsite trailer with the same fitting.
How fast can I get the ASC Engineered Solutions 310054606 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 310054606 come with a warranty?
Absolutely. The ASC Engineered Solutions 310054606 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 310054606?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 310054606 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.