You may also like
4 INCH RIGID T CONDUIT BODY
Manufacturer Resources
Product Specs
- Application:
- For Use with Rigid/IMC Conduit
- Number Of Batteries:
- 0
- Product Group:
- Conduit & Fittings
- Product Type:
- Conduit Body - Series A - Rigid/IMC
- Department:
- Electrical
- Product Subgroup:
- Conduit Bodies
- Product Material:
- Aluminum Die Cast
Red Dot AT-10 – Frequently Asked Questions
1) Will the Red Dot AT-10 conduit body work with 4 inch rigid steel conduit?
Yes. The AT-10 is a 4 inch T conduit body built for rigid and IMC conduit, so it threads onto standard 4 inch rigid steel or intermediate metal conduit runs. It will not accept EMT, which uses setscrew or compression connectors rather than threaded ends.
2) What is a T conduit body used for instead of an LB or LL body?
A T body gives you three openings, so it is what you use where a conduit run has to branch or where you need a pull point with a takeoff. An LB, LL, or LR body only has two openings and changes direction. If you are just turning a corner or coming out of a wall, use an L body; if a third leg of conduit has to join the run, the AT-10 T is the fitting for it.
3) Is the Red Dot AT-10 metal or plastic?
Die cast aluminum. That makes it lighter than a malleable iron body of the same size, which matters on a 4 inch fitting being supported overhead, and it is the usual choice on aluminum or galvanized rigid runs. For heavy industrial or corrosive duty where a cast iron body is specified, this is not a substitute.
4) Does the Red Dot AT-10 come with a cover and gasket?
The AT-10 is the 4 inch Series A T body itself. Covers and gaskets for Series A conduit bodies are ordered separately and sized to the body, so plan on a matching 4 inch Series A cover and gasket to close the fitting.
5) What is the part number for the Red Dot 4 inch rigid T conduit body?
Red Dot AT-10 is the manufacturer part number for the 4 inch T conduit body in the Series A rigid/IMC line. The A prefix identifies the aluminum Series A body and the 10 identifies the 4 inch trade size.
How fast can I get the Red Dot AT-10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Red Dot AT-10 come with a warranty?
Absolutely. The Red Dot AT-10 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Red Dot AT-10?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Red Dot AT-10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.