Minerallac 6-1/2" Grounding Pi...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.60
$0.60
Minerallac 6-1/2" Grounding Pigtail with Quad Drive Screw - #12 AWG Solid Bare Wire Lead

Minerallac 6-1/2" Grounding Pigtail with Quad Drive Screw - #12 AWG Solid Bare Wire Lead

(No reviews yet) Write a Review

Model: 80007

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.60
$0.60
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Minerallac 6-1/2" Grounding Pigtail with Quad Drive Screw - #12 AWG Solid Bare Wire Lead

Professional Electrical Grounding Solution for Fast & Reliable Installation

The Minerallac 6-1/2" Grounding Pigtail delivers professional-grade electrical grounding performance with #12 AWG solid bare wire construction and integrated quad drive grounding screw. This insulated pigtail features a captive GSH grounding screw on one end and pre-stripped 1" lead on the other, designed to make grounding electrical circuits fast and easy in power distribution boxes, junction boxes, and multi-gang receptacle installations.

Professional Features & Benefits

  • 6-1/2" Length: Provides optimal reach and flexibility for various electrical box configurations and grounding applications.
  • #12 AWG Solid Bare Wire: Delivers reliable current-carrying capacity and secure grounding connections for residential and commercial circuits.
  • Quad Drive Grounding Screw: Features captive GSH grounding screw for secure, tamper-resistant connections that won't loosen over time.
  • Pre-Stripped 1" Lead: Eliminates field preparation time with factory-prepared wire end for immediate installation.
  • Insulated Construction: Provides electrical safety and protection while maintaining proper grounding functionality.
  • 2023 NEC Compliance: Meets Article 110.4, 110.14(A)(B) and 250.8 requirements for code-compliant installations.
  • USA Manufacturing: Consistent quality and reliability from United States production facilities.

Technical Specifications

  • Connection: Solid, Bare Wire Lead
  • Country Of Origin: United States
  • Product Length: 6-1/2 in
  • Product Size: #12
  • Product Type: Grounding Pigtail
  • Ratings: Meets 2023 NEC: Article 110.4, 110.14(A)(B) and 250.8
  • Wire Gauage Size: 12 AWG

Professional Applications

  • Power Distribution Box Grounding
  • Junction Box Ground Bonding
  • Multi-Gang Receptacle Box Installation
  • Residential Electrical Panel Grounding
  • Commercial Facility Electrical Systems
  • Industrial Control Panel Applications
  • Electrical Contractor Field Installation

Why Choose Minerallac Quality?

Minerallac grounding pigtails provide reliable electrical safety performance with 2023 NEC compliance and USA manufacturing quality. The solid bare wire construction and captive grounding screw design ensure long-term durability and code-compliant installations for professional electrical applications.

Manufacturer Resources

Product Specs

Connection:
Solid, Bare Wire Lead
Country Of Origin:
United States
Product Length:
6-1/2 in
Wire Size:
#12
Product Type:
Grounding Pigtail
Ratings:
Meets 2023 NEC: Article 110.4, 110.14(A)(B) and 250.8
Wire Gauage Size:
12 AWG
Department:
Electrical
Product Subgroup:
Grounding & Bonding

Minerallac 80007 – Frequently Asked Questions

1) Will a #12 AWG grounding pigtail work for a 20 amp receptacle circuit?
The Minerallac 80007 pigtail uses #12 AWG solid bare wire, which is the same gauge as the branch circuit conductors on a typical 20 amp circuit, so the equipment ground matches the circuit it serves. On 15 amp circuits wired in #14, a #12 ground jumper is still acceptable because it is larger than required. It is a bare solid lead, so it splices directly to the other bare or green grounds in the box.
2) Does this grounding pigtail meet 2023 NEC requirements for bonding a metal box?
It is listed as meeting 2023 NEC Article 110.4, 110.14(A)(B) and 250.8. Article 250.8 is the section covering acceptable means of connecting grounding conductors, which is why the green grounding screw matters here rather than a sheet metal screw.
3) Is 6-1/2 inches of pigtail long enough for a multi-gang or deep junction box?
The lead measures 6-1/2 inches from the screw to the stripped end. That reaches from a box screw hole out past the device plaster ring and back to a wire nut in the rear of the box on a single or two-gang install. On wide multi-gang runs where the ground splice sits several gangs away, plan on a longer bonding jumper or splice through a separate #12 ground conductor.
4) What is a quad drive grounding screw and do I need a special bit?
The captive GSH grounding screw on the Minerallac 80007 takes a quad drive head, meaning it accepts more than one common driver profile so an electrician can seat it with the bit already in the gun. The screw is captive to the wire, so it will not fall off into the box while you are threading it into the box tab.
5) Do I have to strip the end of this ground pigtail before splicing?
No stripping needed. The 80007 comes with a pre-stripped 1 inch lead on the end opposite the grounding screw, so it goes straight into the wire nut or push-in connector with the other grounds.
6) Can I use this pigtail to ground a device in a plastic or nonmetallic box?
It is built to land on a threaded ground tab, so it belongs in metal boxes, metal power distribution enclosures, panels, and control panels. In a nonmetallic box there is nothing to thread the grounding screw into, so you splice the circuit ground straight to the device instead.
7) Is the Minerallac 80007 grounding pigtail made in the USA for Buy American job specs?
Yes, the 80007 is manufactured in the United States, which covers domestic-origin requirements on federal, institutional, and utility work where country of origin is called out on the submittal.
8) What part number do I order for the 6-1/2 inch Minerallac ground pigtail?
Minerallac catalog number 80007. That is the #12 AWG solid bare wire version at 6-1/2 inches with the captive quad drive grounding screw, and it is the only configuration on this item, so there is no length or gauge to specify separately.
How fast can I get the Minerallac 80007 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Minerallac 80007 come with a warranty?
Absolutely. The Minerallac 80007 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Minerallac 80007?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Minerallac 80007 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!