Metallics JSHC658 6-32 x 5/8 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.33
$0.33
Image coming soon

Metallics JSHC658 6-32 x 5/8 in. Socket Head Hex Cap Screws - Alloy Steel Black - Each

(No reviews yet) Write a Review

Model: JSHC658

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.33
$0.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 5/8 in. Socket Head Hex Cap Screws - Alloy Steel Black - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

  • Features

    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)
    • Supplies greater tensile strength than equivalent sizes of Grade-5 or Grade-8 hex head cap screws while requiring less surface area or counterbore since the fastener is intenally wrenched.
    • Alloy Steel Black Material
    • Socket head with Hex Drive
    • 6-32 Diameter, 5/8" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.134 - 0.138 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.218 - 0.226 in.
Fastener Length:
8-May
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C39
Hex Size:
Jul-64
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Alloy_Zinc.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.38 lbs
Product Width:
3 in
Slot Depth:
0.064
Sub Division:
Electrical-E H2
Tensile Strength:
180000 psi minimum
Thread Per Inch:
32
Thread Type:
UN
Wall Thickness:
0.047
Yield Strength:
162000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Finish:
Black
Product Details:
Cap Screw
Product Material:
Alloy Steel Black

Metallics JSHC658 – Frequently Asked Questions

1) Will a 6-32 x 5/8 in. socket head cap screw thread into a standard 6-32 tapped hole or nut?
Yes. The Metallics JSHC658 is a 6-32 UN thread, 32 threads per inch, so it mates with any standard 6-32 tapped hole, nut, or insert. Thread length is the full 5/8 in. nominal screw length.
2) What size hex key drives the JSHC658 socket head cap screw?
It is internally wrenched with a hex key, not a wrench on the outside of the head. For a 6-32 socket head cap screw that is a 7/64 in. hex key, which is the standard drive size at this diameter under ASME B18.3.
3) Is an alloy steel socket head cap screw stronger than a Grade 5 or Grade 8 hex bolt?
Yes. The alloy steel socket head cap screw is rated at 180,000 psi minimum tensile and 162,000 psi minimum yield, higher than equivalent sizes of Grade 5 or Grade 8 hex head cap screws, and it does it in a smaller head footprint because the drive is internal. Hardness is Rockwell C39.
4) Are Metallics JSHC658 cap screws Buy American or ARRA compliant for a government job?
No. They are not Buy American compliant and not ARRA compliant. Country of origin is listed as multiple. If your project carries domestic sourcing requirements, these will not satisfy them.
5) Is the black finish on these alloy steel cap screws suitable for outdoor or wet locations?
No. The finish is a black alloy steel finish with no corrosion-resistant plating, so it belongs in dry interior work such as panel, enclosure, and equipment assembly. For damp or exterior use, specify a zinc plated or stainless socket head cap screw instead.
6) How are Metallics 6-32 socket head cap screws packaged, and is there a minimum order?
They ship in a jar of 100. Order minimum is one jar, so 100 pieces is the smallest quantity. Jar weight is 0.38 lbs.
7) Do these screws meet a recognized dimensional standard for spec work?
Yes, head and socket dimensions conform to ASME B18.3-2012, the standard for socket cap screws, so they interchange dimensionally with any other B18.3 6-32 socket head cap screw on a drawing callout.
8) What trades normally use these 6-32 alloy socket head cap screws?
They are stocked for the electrical, plumbing, and heating and air conditioning trades, typically for fastening into tapped holes in panels, enclosures, equipment housings, and support hardware where a high strength screw is needed in a small counterbore.
9) Are these screws tested for tensile and yield strength at the 5/8 in. length?
Full tensile, yield, elongation, and reduction of area testing applies to cap screws of length 3D or greater, where D is the nominal diameter. For a 6-32 screw the nominal diameter is 0.138 in., so 5/8 in. is well past 3D and the screw falls in the tested range. Elongation is 10 percent minimum and reduction of area 33 percent minimum on machined specimens.
How fast can I get the Metallics JSHC658 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC658 come with a warranty?
Absolutely. The Metallics JSHC658 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC658?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC658 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!