Metallics JTEKD64 6 x 1-1/4 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.10
$0.10
Metallics JTEKD64 6 x 1-1/4 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 100qty

Metallics JTEKD64 6 x 1-1/4 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTEKD64
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.10
$0.10
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 1-1/4 in. 1/4 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

  • Features

    • #2 Drill Point
    • 1/4 Indented Hex Head with Hex Drive
    • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.
    • Steel Zinc Material
    • 6 Diameter, 1-1/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Hex
Fastener Head Height:
0.08 - 0.093 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.244 - 0.25 in.
Fastener Length:
1/1/04
Hardness:
Rockwell C32-40
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Panel Thickness:
0.035 - 0.090 IN
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.52 lbs
Product Width:
3 in
Screw Point Type:
Drill Point
Slot Depth:
0.033 - 0.046
Slot Width:
0.039 - 0.048
Sub Division:
Electrical-E H2
Thread Per Inch:
20
Thread Standard:
SAE J78 - 2013
Torsional Strength:
24 lb-in minimum
Washer Od:
0.302 - 0.328 in.
Washer Thickness:
0.015 - 0.025 IN
Width Across Corners:
0.272
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEKD
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics JTEKD64 – Frequently Asked Questions

1) Do I need to pre-drill a pilot hole for these Metallics hex head screws?
No pilot hole. The JTEKD64 is a Type BSD self-drilling and tapping screw, so the drill point cuts its own hole and the thread taps it in one pass. The description puts drill time at about 2.5 seconds through a 1 mm plate. One driver, one operation, no layout drilling.
2) Will these screws hold up outdoors or in a damp mechanical room?
The JTEKD64 is carbon steel with a zinc finish. Zinc plating is a mild indoor corrosion coating, suitable for dry interior work like enclosures, strut, raceway, and metal stud framing. For exterior exposure, washdown areas, or coastal work, specify a stainless self-drilling screw instead rather than zinc-plated steel.
3) What size driver bit fits the 1/4 indented hex head on the JTEKD64?
A 1/4 in. hex driver or nutsetter. The head measures 0.244 to 0.250 in. across the flats with a width across corners of 0.272 in., and head height runs 0.080 to 0.093 in. A standard magnetic 1/4 in. nutsetter in a screw gun seats it fine, which is why these are the common choice for production sheet metal work over a bit-driven head.
4) Does the washer come attached to the screw or separate?
The washer is part of the fastener on the JTEKD64, under the indented hex head. Washer outside diameter is 0.302 to 0.328 in. with a thickness of 0.015 to 0.025 in. That bearing surface spreads load across thin sheet and helps against pull-through, so there is nothing loose to keep track of on a lift or a ladder.
5) What specs does a Metallics Type BSD self-drilling screw meet for a submittal?
Three to cite on the JTEKD64: dimensions to ASME B18.6.3-2010, thread to SAE J78-2013, and material to AISI 1016-1024 steel. Case hardness is Rockwell C32-40 with a minimum torsional strength of 24 lb-in. Note that SAE J78 does not cover #7 diameter drill screws, so a #7 substitution has no equivalent thread standard behind it.
6) Are Metallics JTEKD screws acceptable on a Buy American or ARRA funded project?
Metallics lists the JTEKD64 as both ARRA compliant and Buy American compliant, with country of origin China. Submit those flags as published; on federally funded work the contracting officer decides what satisfies the clause in your particular contract.
7) Is a #6 x 1-1/4 in. self-drilling screw long enough for my application, and how coarse is the thread?
The JTEKD64 is a #6 diameter, 1-1/4 in. long screw at 20 threads per inch. With a maximum panel thickness of 0.090 in., the 1-1/4 in. length leaves plenty of shank for stacking a bracket, clip, or strap against sheet steel. For thin-to-thin sheet connections where that length would protrude, drop to a shorter #6 in the same JTEKD series.
8) How is the JTEKD64 packaged and what is the smallest quantity I can buy?
These ship in a jar, with an order minimum of 100 count. Practical for a service van or a job box where you want the screws contained rather than loose in a bag.
How fast can I get the Metallics JTEKD64 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKD64 come with a warranty?
Absolutely. The Metallics JTEKD64 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKD64?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKD64 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!