Metallics JDWC3V 6 x 1-1/4 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.13
$0.13
Metallics JDWC3V 6 x 1-1/4 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Coarse Threads - 500qty

Metallics JDWC3V 6 x 1-1/4 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Coarse Threads - Each

(No reviews yet) Write a Review

Model: JDWC3V
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.13
$0.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 1-1/4 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Coarse Threads - 500qty

  • Features

    • Steel Black Phosphate Material
    • Coarse Threads
    • 6 Diameter, 1-1/4" Length
    • Bugle Head with Phillips Drive

  • Additional Notes

    • Other sizes and quantities available by request | In the abscence of a single industry standard for Bugle Heads, these dimensions are offered as a guide; slight deviations are acceptable. | In the abscence of a single industry standard for Deck Screws, these dimensions are offered as a guide; slight deviations are acceptable. | There is no single standard for drywall screw dimensions. These values are offered as a guide; deviations from these specifications may occur.

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.020 - 0.031 in.
Fastener Head Type:
Bugle
Fastener Head Width:
0.315 - 0.347 in.
Fastener Length:
1/1/04
Hardness:
Rockwell C45-64
Language Code:
EN
Material Standard:
AISI 1018
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Bugle_Hd_Phil_Crs_Thrd_Dry_Scr_Blk_Phos.pdf
Order Minimum Imperial:
500
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Depth:
0.106
Phillips Recess Diameter:
0.176 - 0.201
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
2.15 lbs
Product Width:
3 in
Screw Point Type:
Sharp Point
Sub Division:
Electrical-E H2
Thread Per Inch:
8 to 10
Thread Spacing:
Coarse
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Drywall Screw
Type2:
Drywall Screw
Series:
JDWC and DWC
Product Finish:
Black Phosphate/Galvanized
Product Details:
Drywall Screw
Product Material:
Steel Black Phosphate

Metallics JDWC3V – Frequently Asked Questions

1) Can I use these coarse thread drywall screws on metal studs?
Not the right choice. These are coarse thread, sharp point screws, which are made for wood framing. Steel stud framing calls for a fine thread (high-low) drywall screw with a sharp or self-drilling point, which threads into light-gauge steel without stripping. If your job is metal stud, ask for the fine thread version of the DWC family rather than the coarse JDWC3V.
2) Are black phosphate drywall screws okay for exterior or damp locations?
Keep them interior and dry. The JDWC3V is steel with a black phosphate finish, which is a corrosion-inhibiting coating for interior gypsum work, not a weather coating. For exterior sheathing, soffits, or anywhere exposed to moisture, use a hot-dip galvanized or coated exterior fastener instead.
3) What driver bit do I need for Metallics JDWC3V drywall screws?
A #2 Phillips bit. The head is a Phillips recess 0.176 to 0.201 in. in diameter with a 0.106 in. recess depth, so a standard #2 Phillips tip seats fully. Worn #2 bits are the usual cause of cam-out on black phosphate screws, so keep a fresh tip in the collated or screw gun.
4) Will a bugle head drywall screw sit flush enough to tape and mud over?
That is what the bugle head is for. The JDWC3V head is 0.315 to 0.347 in. wide with a head height of only 0.020 to 0.031 in., so the curved underside dimples the paper face and sets just below the surface without tearing it. One coat of compound covers it.
5) How are Metallics JDWC3V drywall screws packaged and what is the minimum order?
They ship in a jar of 500 count, and 500 is the order minimum. Figure one jar per couple of boards at typical stud spacing if you are estimating a small patch job; for full hangs, order by the case count you need.
6) Do Metallics JDWC3V drywall screws qualify for Buy American or ARRA projects?
Both the Buy American and ARRA compliance flags on the JDWC3V are marked compliant. Country of origin is listed as multiple, so if your contract requires documented origin on each shipment, request the certification for the lot you are buying.
7) Are these screws hard enough to drive without snapping heads off?
The JDWC3V is case hardened to Rockwell C45-64 and made from AISI 1018 steel, which is the standard spec for a drywall screw that has to take a 4,000 RPM screw gun without shearing the recess or snapping at the head. Run the gun with a depth-sensing nose piece and the heads set consistently.
8) Why do the head dimensions on these drywall screws show a range instead of one number?
There is no single industry standard for bugle head or drywall screw dimensions, so the head width (0.315 to 0.347 in.) and head height (0.020 to 0.031 in.) are published as ranges and slight deviations are normal. If you are matching an existing fastener for a spec submittal, work from the range rather than one exact figure.
How fast can I get the Metallics JDWC3V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JDWC3V come with a warranty?
Absolutely. The Metallics JDWC3V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JDWC3V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JDWC3V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!