Metallics DWS3V 6 x 1-1/4 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.09
$0.09
Metallics DWS3V 6 x 1-1/4 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Fine Threads - 500qty

Metallics DWS3V 6 x 1-1/4 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Fine Threads - Each

(No reviews yet) Write a Review

Model: DWS3V
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.09
$0.09
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 1-1/4 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Fine Threads - 500qty

  • Additional Notes

    • Other sizes and quantities available by request | In the abscence of a single industry standard for Bugle Heads, these dimensions are offered as a guide; slight deviations are acceptable. | There is no single standard for drywall screw dimensions. These values are offered as a guide;deviations from these specifications may occur.

  • Features

    • Parts are usually supplied with a black phosphate finish.
    • Bugle Head with Phillips Drive
    • Steel Black Phosphate Material
    • Fine Threads
    • 6 Diameter, 1-1/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.020 - 0.031 in.
Fastener Head Type:
Bugle
Fastener Head Width:
0.315 - 0.347 in.
Fastener Length:
1/1/04
Hardness:
Rockwell C44
Language Code:
EN
Material Standard:
AISI 1018
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Bugle_Hd_Phil_Fine_Thrd_Dry_Scr_Blk_Phos.pdf
Order Minimum Imperial:
500
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Depth:
0.106
Phillips Recess Diameter:
0.176 - 0.201
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
1.93 lbs
Product Width:
3 in
Screw Point Type:
Sharp Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Spacing:
Fine
Thread Type:
UNF
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Drywall Screw
Type2:
Drywall Screw
Series:
DWS
Product Finish:
Black Phosphate
Product Details:
Drywall Screw
Product Material:
Steel Black Phosphate

Metallics DWS3V – Frequently Asked Questions

1) Can black phosphate drywall screws be used outdoors or in a wet area?
No. Black phosphate is a dry interior finish only, offering minimal corrosion protection. The DWS3V is a steel screw with a black phosphate coating, intended for interior drywall hanging. For exterior sheathing, bathrooms with standing moisture, or any damp location, use a screw with a corrosion resistant coating rated for that exposure.
2) What size screwdriver bit do I need for Metallics DWS3V drywall screws?
A #2 Phillips bit. The recess is 0.106 inch deep and 0.176 to 0.201 inch across, so a #2 seats fully and a #1 will cam out and chew the recess.
3) Will a bugle head screw sink flush without tearing the drywall paper?
That is what the bugle head is for. The curved underside of the head compresses the paper face rather than cutting it, and with a head height of only 0.020 to 0.031 inch the screw dimples just below the surface for taping. Head width runs 0.315 to 0.347 inch, which gives enough bearing area to hold the board without the head pulling through.
4) Are these drywall screws hard enough to drive into steel studs without snapping?
They are case hardened to Rockwell C44 and made from AISI 1018 steel, which is the standard drywall screw hardness for penetrating light gauge steel framing. Keep the gun speed up and the bit square in the recess; the hardness that lets the point drill is also what makes an off angle screw snap rather than bend.
5) Do these drywall screws meet Buy American or ARRA requirements for a public job?
The Metallics DWS3V is flagged as both ARRA compliant and Buy American compliant. Country of origin is listed as multiple, so if your contract requires a specific origin on the submittal, confirm the origin of the lot you receive.
How fast can I get the Metallics DWS3V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics DWS3V come with a warranty?
Absolutely. The Metallics DWS3V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics DWS3V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics DWS3V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!