Metallics JFWPB15 6 x 2-1/2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JFWPB15 6 x 2-1/2 in. Flat Head Phillips Wood Screws - Brass - 100qty

Metallics JFWPB15 6 x 2-1/2 in. Flat Head Phillips Wood Screws - Brass - Each

(No reviews yet) Write a Review

Model: JFWPB15
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 2-1/2 in. Flat Head Phillips Wood Screws - Brass - 100qty

  • Features

    • Flat Head with Phillips Drive
    • 6 Diameter, 2-1/2" Length
    • Brass Material

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.083 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.244 - 0.279 in.
Fastener Length:
2/1/02
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.083 - 0.106
Phillips Recess Diameter:
0.161 - 0.174
Phillips Recess Width:
0.029
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.05 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWPB
Product Details:
Wood Screw
Product Material:
Brass

Metallics JFWPB15 – Frequently Asked Questions

1) How many screws come in a jar of Metallics JFWPB15 brass wood screws, and can I buy less than a full jar?
The JFWPB15 brass wood screws ship in a jar of 100, and 100 is the order minimum, so a jar is the smallest quantity sold. Each jar weighs 1.05 lbs.
2) What size Phillips driver do I need for #6 brass flat head wood screws?
A #2 Phillips bit is the correct driver for the JFWPB15. The recess runs 0.161 to 0.174 inch in diameter and 0.083 to 0.106 inch deep, so a #1 bit will cam out and chew the recess. Brass is soft, so run the driver slow and pilot the hole.
3) Can I use these on a federally funded job with domestic sourcing requirements?
No. The JFWPB15 brass wood screws are not Buy American compliant and are not ARRA compliant, with country of origin listed as multiple. For a job with domestic preference clauses you will need a domestically sourced fastener instead.
4) Do these brass screws meet a recognized dimensional standard for spec work?
Head, drive and thread dimensions conform to ASME B18.6.1, with the thread called out to ASME B18.6.1-1997. If your drawing calls for a B18.6.1 flat head Phillips wood screw, the JFWPB15 answers it.
5) Why pick a brass wood screw over a plated steel one?
Two reasons drive the choice: appearance and corrosion. Solid brass stays brass all the way through, so it matches brass hinges, strike plates, escutcheons and marine or exterior trim without a plating that wears off at the recess. The tradeoff is strength. Brass is softer than steel, so it will twist off if you drive it dry into hardwood. Pilot drill, and if the fastener is carrying real structural load use steel instead.
6) Are these wood screws meant for electrical and mechanical trade work?
Yes. Metallics lists the JFWPB series for the electrical, plumbing, heating and air conditioning trades, which is the usual use case: mounting boxes, straps, plates and brackets to wood studs and framing. Nothing about the screw limits it to those trades, but that is the market it is stocked for.
7) Is a 2-1/2 inch #6 screw long enough to go through drywall into a stud?
Yes, with room to spare. At 2-1/2 inches, the screw clears 1/2 inch drywall plus a mounting bracket and still buries over 1-1/2 inches into framing. If you are only fastening a thin plate to bare wood, this length will likely overshoot a 2x4 laid flat, so step down in length for that.
8) I need a different length or quantity in the same brass Phillips wood screw. Is that possible?
Metallics builds the JFWPB series in other diameters, lengths and pack quantities beyond the #6 x 2-1/2 inch jar of 100, available by request. Specify the diameter, length and quantity you want and it can be quoted against the same series.
How fast can I get the Metallics JFWPB15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWPB15 come with a warranty?
Absolutely. The Metallics JFWPB15 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWPB15?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWPB15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!