Metallics TSP14M 6 x 3/4 in. P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.06
$0.06
Metallics TSP14M 6 x 3/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 1000qty

Metallics TSP14M 6 x 3/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: TSP14M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.06
$0.06
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 3/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 1000qty

  • Additional Notes

    • Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6.4

  • Features

    • Pan head with Phillips Drive
    • Steel Zinc Material
    • 6 Diameter, 3/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
1000 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2013
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.087 - 0.097 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.256 - 0.27 in.
Fastener Length:
4-Mar
Hardness:
Rockwell C28 - 38
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Order Minimum Imperial:
1000
Order Minimum Uom Imperial:
TH
Pack Type:
Jar
Phillips Recess Depth:
0.091
Phillips Recess Diameter:
0.153 - 0.166
Phillips Recess Width:
0.028
Product Group:
Fasteners
Screw Point Type:
Gimlet Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
ASME B18.6.4
Torsional Strength:
24 lb-in minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type A Tapping Screw
Type2:
Type A Tapping Screw
Series:
JTSP
Product Finish:
Zinc
Product Details:
Type A Tapping Screw
Product Material:
Steel Zinc

Metallics TSP14M – Frequently Asked Questions

1) Will a Type A sharp point tapping screw hold in sheet metal without a pilot hole?
The TSP14M is a Type A tapping screw with a gimlet (sharp) point and 18 threads per inch, so it starts itself in thin sheet metal, sheet metal boxes, and similar light-gauge material. Type A is for thin stock only; in thicker steel, a drilled pilot sized to the thread is still the right approach, and heavy structural steel calls for a self-drilling screw instead.
2) Will a #6 pan head screw clear inside an electrical box or sit flush against a plate?
The pan head on the TSP14M measures 0.256 to 0.27 in. across and 0.087 to 0.097 in. high, so it stands proud of the surface rather than sitting flush. That low profile clears most device plates and box interiors, but if you need the head buried, use a flat head screw in a countersunk hole instead.
3) Are Metallics TSP14M screws Buy American or ARRA compliant for a government job?
No. The TSP14M is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. On a federally funded project with domestic sourcing requirements, this screw will not satisfy the spec.
4) What driver bit do I need for the Metallics TSP14M #6 x 3/4 in. pan head tapping screws?
A #2 Phillips bit. The TSP14M uses a Phillips drive with a recess diameter of 0.153 to 0.166 in. and a recess depth of 0.091 in., so a #2 tip seats properly without camming out. A #1 will spin out of the recess and a #3 will not bottom.
5) How are the Metallics TSP14M tapping screws packaged and what is the minimum order?
They ship in a jar of 1,000. The order minimum is 1,000 pieces, so this is a bulk pack for crews doing repeated box, strap, and plate fastening rather than a small count for a single repair.
6) What standards do these #6 pan head Phillips tapping screws meet?
Dimensions follow ASME B18.6.3-2013 for the head and drive, and the thread follows ASME B18.6.4 for tapping screws. Steel is AISI 1016 to 1024, case hardened to Rockwell C28 to 38. Note that Metallics states dimensions for #9 diameter are independent of ASME B18.6.4.
7) How much torque will these #6 tapping screws take before they snap?
24 lb-in minimum torsional strength, with a hardened body at Rockwell C28 to 38. That is enough for hand driving or a clutched driver on light-gauge steel, but a high-torque impact driver on a #6 shank will twist heads off. Back the clutch down.
8) Is a zinc plated steel tapping screw okay for outdoor or damp locations?
The TSP14M is zinc plated carbon steel, which is a dry indoor finish. It handles normal interior electrical work fine, but in wet locations, exterior exposure, or corrosive environments the plating gives out and you want stainless or hot dip galvanized fasteners instead.
How fast can I get the Metallics TSP14M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TSP14M come with a warranty?
Absolutely. The Metallics TSP14M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TSP14M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TSP14M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!