NSi Industries 60-Minute Sprin...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$64.03
NSi Industries 60-Minute Spring Wound In-Wall Timer with Hold, SPDT, 125-277V, White

NSi Industries 60-Minute Spring Wound In-Wall Timer with Hold, SPDT, 125-277V, White

(No reviews yet) Write a Review

Model: A560MHW

In Stock (leaves warehouse same day if ordered before 3pm ET)

$64.03
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

NSi Industries 60-Minute Spring Wound In-Wall Timer with Hold, SPDT, 125-277V, White

The NSi Industries 60-Minute Spring Wound In-Wall Timer with Hold is a twist-style spring wound time switch designed for single gang wall plate mounting, delivering reliable manual timing control for fans, lighting, and other electrical loads. Rated SPDT with a 125-250-277 VAC contact rating and 50-60 Hz frequency, this cULus listed timer provides a 60-minute scheduling range with a convenient hold function for continuous operation. Finished in white to blend with standard wall plates, it is built as a durable spring wound in-wall time switch suitable for both residential and light commercial applications.

Key Features

  • Scheduling: 60-minute spring wound timing cycle for precise, on-demand run times.
  • Hold Function: Twist timer with hold allows continuous operation beyond the standard 60-minute cycle when needed.
  • SPDT Action: Single-pole, double-throw switching for flexible circuit control.
  • Contact Rating: 125-250-277 VAC contact rating supports a wide range of connected loads.
  • Frequency Rating: Rated for 50-60 Hz electrical systems.
  • Mounting: Single gang wall plate mounting and enclosure for standard in-wall installation.
  • Operating Temperature: Rated for use across a 32-122 F operating temperature range.
  • Finish: Clean white finish for a standard, unobtrusive wall appearance.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Brand Name: NSi
  • Mounting: Single Gang Wall Plate
  • Action: SPDT
  • Contact Rating: 125-250-277 VAC
  • Standard: cULus
  • Type: Spring Wound In Wall Time Switch
  • Operating Temperature: 32-122 F
  • Scheduling: 60 Minute
  • Frequency Rating: 50-60 Hz
  • Enclosure: Single Gang Wall Plate

Typical Applications

  • Whole House Fans
  • Indoor and Outdoor Lighting Control
  • Bathroom Exhaust Fans
  • Self-Storage Facility Control
  • Residential and Light Commercial Wiring

Why NSi Industries?

NSi Industries builds this spring wound in-wall timer to a cULus listed standard, with a 125-250-277 VAC SPDT contact rating and defined 32-122 F operating temperature range for dependable performance. The hold function and 60-minute scheduling give installers and homeowners flexible, code-compliant timing control for fans and lighting across whole-house, bathroom, and self-storage applications.

Manufacturer Resources

Spec Sheet

Product Specs

Mounting Method:
Single Gang Wall Plate
Action:
SPDT
Amperage Rating:
125-250-277 VAC
Standards:
cULus
Product Type:
Time Switch
Operating Temperature:
32-122 F
Scheduling:
60 Minute
Brand Name:
NSi
Frequency Rating:
50-60 Hz
Configuration:
Single Gang Wall Plate
Application:
Whole House Fans-Indoor-Outdoor Lighting-Bathroom Fans-Self Storage Control
Listing:
cULus
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Lighting Controls & Sensors

NSi A560MHW – Frequently Asked Questions

1) Will the NSi A560MHW spring wound timer work on a 277V lighting circuit?
Yes. The NSi A560MHW in-wall spring wound timer carries a 125-250-277 VAC contact rating at 50-60 Hz, so it can switch 120V residential circuits and 277V commercial lighting branch circuits alike. That makes it usable in a light commercial corridor or storage building running 277V as well as a house bathroom fan on 120V.
2) Does this NSi 60-minute timer fit a standard single gang box and wall plate?
It mounts to a single gang wall plate and is built as a single gang enclosure, so it drops into a standard single gang opening in place of a toggle switch. Use a standard single gang plate; the timer itself is white to match common device plates.
3) Can I use this NSi timer for an exterior light or an unheated storage building?
Its rated operating temperature range is 32 to 122 F. It will control outdoor lighting, and NSi lists outdoor lighting and self storage control among the intended applications, but the timer itself has to live in a space that does not drop below freezing. A device in an unheated building in a cold climate falls outside that range.
4) What does the hold feature on this spring wound timer actually do?
Twisting past the timed range into the hold position keeps the load running continuously instead of counting down. That is how you leave a bathroom fan or a storage area light on indefinitely, then twist back to the 60 minute dial range when you want it to shut itself off. Without hold, the switch always times out.
5) Why is this timer SPDT instead of a simple on/off, and what does that let me wire?
The A560MHW switches SPDT, single pole double throw, so it has a common plus two switched outputs rather than one. That lets you transfer a circuit between two loads, or energize one path while the timer runs and the other when it times out, instead of only making and breaking a single leg. For a plain fan or light you simply use the common and one of the throws.
6) Is the NSi A560MHW timer listed for commercial work?
It is cULus listed, which covers both US and Canadian installations for inspection purposes. Combined with the 125-250-277 VAC rating, it is used in residential and light commercial wiring.
7) Is a spring wound timer or an electronic timer switch the better choice for bathroom fans?
A spring wound unit like the A560MHW is fully mechanical, so it needs no neutral and no battery, and it cannot lose its setting in a power outage. You twist the dial and it winds down. The tradeoff is a fixed 60 minute maximum range and audible mechanical operation. An electronic countdown timer gives you preset button intervals and longer durations, but typically requires a neutral in the box. For multifamily and self storage fleets where tenants break things and nobody resets settings, the spring wound version is the simpler standardization.
8) What is the exact part number to order this NSi 60-minute timer with hold in white?
Order NSi Industries A560MHW. It is the 60 minute spring wound in-wall time switch with hold, SPDT, white. One configuration only, so there is no finish or voltage option to specify.
How fast can I get the NSi A560MHW delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the NSi A560MHW come with a warranty?
Absolutely. The NSi A560MHW is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the NSi A560MHW?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the NSi A560MHW from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!