Klein Tools 716PNDHC 7/16-Inch...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$72.49
$22.49
Klein Tools 716PNDHC 7/16-Inch Hollow Magnetic Color-Coded Power Nut Driver

Klein Tools 716PNDHC 7/16-Inch Hollow Magnetic Color-Coded Power Nut Driver

(No reviews yet) Write a Review

Model: 716PNDHC
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$72.49
$22.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
7/16-Inch Hollow Magnetic Color-Coded Power Nut Driver

  • Features

    • Durable finish for corrosion resistance
    • Impact-rated nut driver for the toughest driving applications
    • 5-Inch sturdy shaft for extended reach and access
    • 7/16-Inch Power Nut Driver with a Rare-Earth magnet to retain fasteners for one-handed driving
    • Magnet size designed for the specific hex size to hold screws and nuts more securely
    • Replacement part for the Magnetic Color-Coded Power Nut Setter Set (Cat. No. 32950)
    • 3-3/4-Inch (9.5 cm) hollow core facilitates work on threaded rod
    • Color-coded double line for easy size identification
    • Rare-Earth Magnet, Impact Rated, Color Coded, Extended Length

  • Warnings

    • Do NOT use to pry or chisel.
    • NOT insulated. Will NOT protect against electrical shock.
    • Always wear approved eye protection.


716PNDHC - spec sheet

Manufacturer Resources

Product Specs

Color Code:
Brown
Insulated:
No
Magnetic:
Yes
Measurement Standard:
SAE
Nut Driver Sizes:
7/16"
Overall Height:
0.65" (1.7 cm)
Overall Length:
6.3" (16 cm)
Overall Width:
0.65" (1.7 cm)
Shaft Length:
5'' (12.7 cm)
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Type:
Hollow Nut Setter
Product Details:
Hollow Nut Setter
Product Height:
0.6480 in
Product Material:
Steel Alloy
Product Weight:
0.1700 lbs
Product Width:
0.6480 in
Product Depth:
6.3150 in

Klein Tools 716PNDHC – Frequently Asked Questions

1) Can the Klein 716PNDHC nut driver run down a nut on threaded rod?
That is what the hollow core is for. The 716PNDHC has a 3-3/4 inch (9.5 cm) hollow core, so the rod passes up inside the driver while you spin the nut down. Depth of travel is limited to that 3-3/4 inches before the rod bottoms out in the shaft, so on long all-thread you run the nut in stages or start it closer to final position.
2) Is the Klein 716PNDHC safe to use on an impact driver?
It is impact rated, so it is built for driving with an impact driver rather than just a drill. Klein calls it out for the toughest driving applications. It is a steel alloy tool with a corrosion resistant finish. Do not use it to pry or chisel.
3) Is the Klein 716PNDHC insulated for work on live circuits?
No. It is not insulated and will not protect against electrical shock. De-energize the circuit before using it. If you need shock protection, you need a tool rated and marked as insulated, not this one.
4) Is the 716PNDHC the replacement piece for the Klein 32950 nut setter set?
Yes. The 716PNDHC is the 7/16 inch replacement driver for the Magnetic Color-Coded Power Nut Setter Set, Cat. No. 32950, so you can restock one lost size instead of rebuying the set.
5) Will this Klein nut driver hold the screw by itself for one-handed work overhead?
Yes. The 716PNDHC uses a rare-earth magnet sized specifically to the 7/16 inch hex so the fastener stays seated while you line up a strut nut or sheet metal screw with your other hand on the ladder.
6) How deep can the Klein 7/16 hollow nut driver reach into a recessed box or channel?
The shaft is 5 inches (12.7 cm) long with a 6.3 inch (16 cm) overall length, and the body is only 0.65 inch across, so it gets down inside strut channel, junction boxes and other tight recesses that a stubby setter cannot reach.
7) Is the Klein 716PNDHC sized in SAE or metric?
SAE. The single size offered is 7/16 inch, which is the common head on self-drilling sheet metal screws and strut hardware. If your fasteners are metric, this one will round them and you want a metric setter instead.
8) What is the brown color band on the Klein power nut driver for?
Brown is the size code for 7/16 inch on Klein's color-coded nut setters. The double line lets a crew grab the right size out of a pouch by color instead of reading the stamp, which matters when several SAE sizes are in the same kit.
How fast can I get the Klein Tools 716PNDHC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 716PNDHC come with a warranty?
Absolutely. The Klein Tools 716PNDHC is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 716PNDHC?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 716PNDHC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!