Klein Tools 916PNDHC 9/16-Inch...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$72.49
$22.49
Klein Tools 916PNDHC 9/16-Inch Hollow Magnetic Color-Coded Power Nut Driver

Klein Tools 916PNDHC 9/16-Inch Hollow Magnetic Color-Coded Power Nut Driver

(No reviews yet) Write a Review

Model: 916PNDHC
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$72.49
$22.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
9/16-Inch Hollow Magnetic Color-Coded Power Nut Driver

  • Features

    • Color-coded double line for easy size identification
    • Rare-Earth Magnet, Impact Rated, Color Coded, Extended Length
    • Magnet size designed for the specific hex size to hold screws and nuts more securely
    • Impact-rated nut driver for the toughest driving applications
    • 5-Inch sturdy shaft for extended reach and access
    • Durable finish for corrosion resistance
    • 3-3/4-Inch (9.5 cm) hollow core facilitates work on threaded rod
    • 9/16-Inch Power Nut Driver with a Rare-Earth magnet to retain fasteners for one-handed driving

  • Warnings

    • Do NOT use to pry or chisel.
    • NOT insulated. Will NOT protect against electrical shock.
    • Always wear approved eye protection.


916PNDHC - spec sheet

Manufacturer Resources

Product Specs

Color Code:
Orange
Insulated:
No
Magnetic:
Yes
Measurement Standard:
SAE
Nut Driver Sizes:
9/16"
Overall Height:
0.81" (2.1 cm)
Overall Length:
6.3" (16 cm)
Overall Width:
0.81" (2.1 cm)
Shaft Length:
5'' (12.7 cm)
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Type:
Hollow Nut Setter
Product Details:
Hollow Nut Setter
Product Height:
0.8060 in
Product Material:
Steel Alloy
Product Weight:
0.2400 lbs
Product Width:
0.8060 in
Product Depth:
6.3150 in

Klein Tools 916PNDHC – Frequently Asked Questions

1) Can the Klein 916PNDHC nut driver run down a nut on all-thread rod?
That's what the hollow core is for. The 916PNDHC has a 3-3/4 inch (9.5 cm) hollow core, so threaded rod passes up into the shaft while you drive the nut. Anything sticking out past 3-3/4 inches will bottom out in the driver, so on long protruding rod you'll need to start the nut lower or work from the open end.
2) Is the 916PNDHC safe to use on a live electrical panel?
No. The 9/16-inch Klein power nut driver is not insulated and will not protect against electrical shock. De-energize before you work, or use a properly insulated 1000V-rated driver for live work. Klein also warns against using it to pry or chisel.
3) Will this Klein nut driver hold up in an impact driver?
Yes, the 916PNDHC is impact rated, so it's built for use in impact drivers, not just drill/drivers. The body is steel alloy with a corrosion-resistant finish.
4) How deep can this nut driver reach into a recessed box or strut channel?
The shaft is 5 inches (12.7 cm) long and the tool measures 6.3 inches (16 cm) overall, at 0.81 inch across the body. That extended shaft gets you down into strut, junction boxes, and behind obstructions where a stubby setter won't reach.
5) Does the magnet in the 916PNDHC actually hold a nut for one-handed work overhead?
It uses a rare-earth magnet sized specifically to the 9/16 hex, so the nut or screw stays seated while you start it one-handed. That's the practical difference on ladder work and overhead strut runs versus a plain non-magnetic setter.
6) What's the difference between a hollow nut setter and a standard power nut driver?
A standard nut driver has a shallow socket, so the fastener bottoms out once about a thread or two of stud protrudes. The 916PNDHC is a hollow nut setter with a 3-3/4 inch open bore through the shaft, letting the stud or threaded rod pass right through. Pick the hollow version anywhere you're running nuts down all-thread hangers; a solid setter is fine for sheet metal screws and short bolts.
How fast can I get the Klein Tools 916PNDHC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 916PNDHC come with a warranty?
Absolutely. The Klein Tools 916PNDHC is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 916PNDHC?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 916PNDHC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!