You may also like
7/16 x 3/4 Nylon Flat Washer - USA Made
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Washers
Metallics JSW716D – Frequently Asked Questions
1) What size bolt does the Metallics JSW716D nylon flat washer fit?
The JSW716D is a 7/16 inch nylon flat washer with a 3/4 inch outside diameter, so it seats on 7/16 inch bolts, screws, or threaded rod. The 3/4 inch OD gives you bearing area without overhanging a standard 7/16 nut face.
2) Why use a nylon washer instead of a steel one on electrical work?
Nylon is non-conductive and won't corrode, so it's used to isolate a fastener from a panel, enclosure, or dissimilar metal and to keep a bolted joint from galling or marring a finished surface. A steel or hardened washer is the choice when you need load-bearing strength under high torque; the JSW716D nylon washer is for insulating and spacing, not for clamping heavy structural loads.
3) Is the Metallics JSW716D washer made in the USA?
Yes, the JSW716D 7/16 x 3/4 nylon flat washer is USA made. That matters on government, institutional, and public-works jobs where domestic-sourcing language shows up in the spec.
4) Can a nylon flat washer be used outdoors or in damp locations?
Nylon doesn't rust, so the JSW716D holds up where a plain steel washer would stain or seize. Keep in mind nylon is a polymer, not metal: it will cold-flow if you over-torque it and it is not a substitute for a metal washer where the fastener has to be pulled down hard.
5) Do I order the Metallics JSW716D by the piece or is it one part number for all sizes?
JSW716D is a single size-specific part number for the 7/16 x 3/4 nylon flat washer. There is one model on it, so if you need a different bolt diameter you're ordering a different Metallics number, not a different option on this one.
How fast can I get the Metallics JSW716D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSW716D come with a warranty?
Absolutely. The Metallics JSW716D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSW716D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSW716D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.