Washer 1/2 x 3/4 Nylon Flat Washers - (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Washers
Metallics JSWN12D – Frequently Asked Questions
1) What size bolt does the Metallics JSWN12D nylon flat washer fit?
The JSWN12D is a 1/2 x 3/4 nylon flat washer, so it takes a 1/2 inch bolt, rod, or stud through the 1/2 inch inside diameter with a 3/4 inch outside bearing surface. For threaded rod hanging electrical supports, that means 1/2 inch rod, not 3/8.
2) Why use a nylon washer instead of steel on an electrical install?
Nylon is non-conductive and won't corrode, so a 1/2 x 3/4 nylon flat washer is what you reach for when you need to isolate a fastener electrically or keep dissimilar metals from reacting against each other. It also spreads load without scratching a finished surface. Where you need load-bearing strength under high torque, use a steel or hardened washer instead.
3) How many washers come in a jar of Metallics JSWN12D?
Each jar holds 100 of the 1/2 x 3/4 nylon flat washers. The jar pack is handy for a van or a shop bench since it reseals and keeps the count contained rather than spilling in a bag.
4) Will a 1/2 inch nylon flat washer work under a nut on 1/2 inch threaded rod for strut and conduit hangers?
Yes. With a 1/2 inch inside diameter it slips over 1/2 inch all-thread, and the 3/4 inch outside diameter gives you a bearing face under the nut. It's a flat washer, not a lock washer, so if the assembly sees vibration add a lock nut or lock washer for retention.
5) Is the Metallics JSWN12D a single washer or a bulk pack?
It ships as a 100-piece jar of 1/2 x 3/4 nylon flat washers under part number JSWN12D, not as a loose single piece. For MRO stocking or a multi-unit job that's the quantity you're buying into.
How fast can I get the Metallics JSWN12D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSWN12D come with a warranty?
Absolutely. The Metallics JSWN12D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSWN12D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSWN12D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.