Metallics JFMP88 8-32 x 1-1/2 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.21
$0.24
Metallics JFMP88 8-32 x 1-1/2 in. Flat Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JFMP88 8-32 x 1-1/2 in. Flat Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFMP88
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.21
$0.24
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 1-1/2 in. Flat Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Flat head with Phillips Drive
    • Zinc yellow screws are popular in electronics applications.
    • Steel Zinc Material
    • 8-32 Diameter, 1-1/2" Length

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.084 - 0.1 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.285 - 0.312 in.
Fastener Length:
1/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Gaging Diameter:
0.267
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.11
Phillips Recess Diameter:
0.182
Phillips Recess Width:
0.03
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.74 lbs
Product Width:
3 in
Protrusion Gaging Diameter:
0.023 - 0.039 Above
Sub Division:
Electrical-E H2
Tensile Strength:
850 lb minimum
Thread Per Inch:
32
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JFMP88 – Frequently Asked Questions

1) Does the flat head on the JFMP88 sit flush, and what countersink does it need?
The head is a flat countersunk type measuring 0.285 to 0.312 in. across and 0.084 to 0.1 in. high, made to ASME B18.6.3-1998. In an 82 degree countersink or a factory-countersunk device plate it sits flush with the surface. If your hole is not countersunk, the head will stand proud by roughly its head height, so use a pan or round head instead.
2) Do these Metallics screws meet Buy American or ARRA requirements for a federal job?
No. The JFMP88 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. On a federally funded project with domestic sourcing language in the spec, these will not pass.
3) What size Phillips driver do I need for these 8-32 screws?
A #2 Phillips. The recess is 0.182 in. in diameter and 0.11 in. deep, so a #1 bit will cam out and strip the recess on a 1-1/2 in. screw. Keep a fresh #2 bit in the gun.
4) Can I use these zinc plated screws outdoors or in a wet location?
Zinc plated carbon steel is an indoor or dry location fastener. In exterior, damp, or washdown environments the plating sacrifices and the steel underneath rusts. For those openings specify a stainless machine screw in the same 8-32 x 1-1/2 in. size instead.
5) How are the JFMP88 screws packaged and what is the minimum order?
They ship in a jar of 100, which is also the order minimum. That is the MRO shop and service van pack, handy to keep on the shelf for device and cover work.
6) What trades use this size of flat head machine screw most?
Metallics lists the FM and FMP series for the electrical, plumbing, and heating and air conditioning trades. In practice the 8-32 x 1-1/2 in. flat head goes into device and plate mounting, strap and bracket attachment, and panel or enclosure hardware where the head needs to sit down in a countersink.
7) Is this the yellow zinc or clear zinc finish?
The finish is listed simply as zinc, and Metallics notes that its zinc yellow screws are common in electronics work. If your spec calls out a specific plating color, match on that rather than assuming the chromate tint.
How fast can I get the Metallics JFMP88 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFMP88 come with a warranty?
Absolutely. The Metallics JFMP88 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFMP88?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFMP88 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!