Metallics JSPMP22SS 8-32 x 2-1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.70
$0.70
Metallics JSPMP22SS 8-32 x 2-1/2 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JSPMP22SS 8-32 x 2-1/2 in. Pan Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSPMP22SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.70
$0.70
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 2-1/2 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Features

    • 8-32 Diameter, 2-1/2" Length
    • 18-8 Stainless Material
    • Pan head with Phillips Drive

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.105 - 0.115 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.306 - 0.322 in.
Fastener Length:
2/1/02
Hardness:
Rockwell BBS-B9S
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Diameter:
0.175
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.27 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.071 - 0.097
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SPMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSPMP22SS – Frequently Asked Questions

1) Are 18-8 stainless machine screws OK for outdoor or damp-location work?
18-8 stainless is an austenitic corrosion-resistant alloy, which is why it gets specified for wet-location boxes, exterior fixtures, and coastal or washdown areas where a plated steel screw rusts in the hole. The Metallics JSPMP22SS is 18-8 throughout, not plated, so cutting or trimming the screw does not expose a bare substrate.
2) Do these 8-32 stainless screws qualify for a federally funded or Buy American job?
The JSPMP22SS is flagged both ARRA compliant and Buy American compliant, which is what a public agency, school district, or GSA-funded project needs on the submittal. Country of origin is listed as multiple.
3) Is a machine screw the right choice, or do I need a self-tapping sheet metal screw?
A machine screw like the JSPMP22SS has a uniform 8-32 machine thread with a blunt end, so it needs an existing tapped hole or a nut, such as the threaded ears on a device yoke or box. It will not cut its own thread. If you are driving into unthreaded sheet metal with no nut behind it, use a self-tapping sheet metal screw instead.
4) What size Phillips driver do I need for these screws?
A #2 Phillips bit. The recess is a 0.175 inch diameter Phillips with a gaging depth of 0.071 to 0.097 inch, so a #1 will cam out and a #3 will not seat.
5) How much does the pan head stick up and how wide is it?
Head width runs 0.306 to 0.322 inch and head height 0.105 to 0.115 inch, per ASME B18.6.3-2010. That low, broad profile is why a pan head is used under cover plates and on sheet metal: it spreads bearing load without the countersink a flat head needs.
6) How are these sold, and is there a minimum order?
They ship in a jar of 100 count, which is the order minimum. Shelf weight of the jar is 1.27 lbs and it measures 3 x 3 x 3.6 inches, useful if you are planning bin or van shelf space for a standardized fastener stock.
7) Can I use these stainless screws where a job spec calls out a tensile strength?
Tensile strength is given as 80,000 psi minimum with a Rockwell hardness of BBS-B9S. One caution worth repeating: there is no single performance standard for stainless machine screws, so treat the stainless tensile figure as approximate. If a drawing calls out a graded strength class, a graded steel screw is the right call, not stainless.
How fast can I get the Metallics JSPMP22SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSPMP22SS come with a warranty?
Absolutely. The Metallics JSPMP22SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSPMP22SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSPMP22SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!