Metallics JSPMP20SS 8-32 x 2 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.61
$0.61
Metallics JSPMP20SS 8-32 x 2 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JSPMP20SS 8-32 x 2 in. Pan Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSPMP20SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.61
$0.61
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 2 in. Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • 18-8 Stainless Material
    • Pan head with Phillips Drive
    • 8-32 Diameter, 2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.105 - 0.115 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.306 - 0.322 in.
Fastener Length:
2
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell BBS-B9S
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Diameter:
0.175
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.11 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.071 - 0.097
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SPMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSPMP20SS – Frequently Asked Questions

1) How many screws come in a jar of the Metallics JSPMP20SS 8-32 machine screws?
They ship in a jar of 100, and 100 is the order minimum. Jar weight is listed at 1.11 lbs. If you need a different count or size, Metallics offers other sizes and quantities by request.
2) Will an 8-32 x 2 in. pan head screw thread into a standard electrical box or device yoke?
Yes. 8-32 is the standard machine screw thread used for device mounting in outlet boxes, cover plates, and fixture straps, and this screw is cut 32 threads per inch to that thread. At 2 inches long it is the extended length you reach for when a device has to be set out past a deep mud ring, tile, or thick wall finish rather than mounted flush.
3) Do these screws qualify for a Buy American or ARRA federal project?
No. The JSPMP20SS is listed as not Buy American compliant and not ARRA compliant, with country of origin reported as multiple. On a federally funded job with domestic-content requirements you will need a domestically sourced fastener instead.
4) Are these 18-8 stainless screws safe to use outdoors or in a damp location?
The screws are 18-8 stainless throughout, the austenitic grade normally specified for wet and outdoor work, so they hold up where plated steel screws rust and seize. Common uses here are electrical, plumbing, and HVAC work.
5) What size Phillips driver do I need for these machine screws?
A #2 Phillips. The recess diameter is 0.175 in. with a gaging depth of 0.071 to 0.097 in., so a #2 bit seats fully; a #1 will cam out and a #3 will not drop into the recess.
6) How much does the pan head stick up, and will it clear a flush cover plate?
Head height runs 0.105 to 0.115 in. with a head width of 0.306 to 0.322 in. That is a low, rounded profile with a flat bearing face, so it sits proud of the surface by roughly a tenth of an inch. If you need the head buried flush in the material, a pan head is the wrong choice and you want a flat or oval head in a countersunk hole instead.
7) What dimensional standard do these Metallics machine screws meet?
They are made to ASME B18.6.3-2010, the standard covering inch-series machine screw head and thread dimensions, with material called out to SAE. That means head sizes and threads interchange with any other B18.6.3 8-32 pan head screw you already have on the job.
8) What is the tensile strength of these stainless machine screws?
80,000 psi minimum. Worth knowing before you spec it: Metallics states that tensile values for stainless screws are approximations, because there is no single performance standard for stainless machine screws. Hardness is given as Rockwell BBS-B9S. For a rated structural connection, use a graded steel fastener with a published strength class rather than a stainless machine screw.
How fast can I get the Metallics JSPMP20SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSPMP20SS come with a warranty?
Absolutely. The Metallics JSPMP20SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSPMP20SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSPMP20SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!