Metallics JSPM14SS 8-32 x 3/4 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.47
$0.47
Metallics JSPM14SS 8-32 x 3/4 in. Pan Head Slotted Machine Screws - 18-8 Stainless - 100qty

Metallics JSPM14SS 8-32 x 3/4 in. Pan Head Slotted Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSPM14SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.47
$0.47
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 3/4 in. Pan Head Slotted Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Pan head with slotted Drive
    • 8-32 Diameter, 3/4" Length
    • 18-8 Stainless Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.085 - 0.096 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.306 - 0.322 in.
Fastener Length:
4-Mar
Hardness:
Rockwell BBS-B9S
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.52 lbs
Product Width:
3 in
Slot Depth:
0.045 - 0.058
Slot Width:
0.045 - 0.054
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SPM
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSPM14SS – Frequently Asked Questions

1) Are these stainless machine screws OK for outdoor or damp locations?
They are 18-8 stainless, which is the austenitic grade normally specified for wet, damp and exterior work because it resists rust without plating. That makes the JSPM14SS a reasonable choice for exterior boxes, weatherproof covers and washdown areas where a zinc-plated screw would bloom rust and seize in the box threads.
2) How much torque will an 18-8 stainless 8-32 screw take before it snaps?
Tensile strength is listed at 80,000 psi minimum, with hardness in the Rockwell BBS-B9S range. Note the vendor states stainless tensile values are approximations only, since there is no single performance standard for stainless machine screws. For structural or high-torque fastening, a hardened carbon steel screw is the usual pick; 18-8 is chosen for corrosion resistance, not strength.
3) Do these Metallics machine screws meet a recognized dimensional standard for spec work?
Yes. The JSPM14SS is made to ASME B18.6.3-2010, the dimensional standard for slotted and recessed head machine screws, with material to SAE. If a submittal calls out B18.6.3 pan head slotted, this meets that call-out.
4) Can I buy these 8-32 stainless screws individually or do I have to take a full jar?
They ship in a jar with an order minimum of 100 count, so the practical buying unit is the 100-piece jar rather than loose pieces. Jar packaging keeps them from scattering in a truck bin. Other sizes and quantities in the series are available by request.
5) Will these screws satisfy a Buy American or ARRA requirement on a public project?
Both ARRA Compliant and Buy American Compliant are flagged C on the JSPM14SS, with country of origin listed as multiple. For federally funded or state work where the spec cites those provisions, that is the compliance status on record for this item.
6) What does a jar of these 8-32 x 3/4 stainless screws weigh for shipping or van stocking?
Listed product weight is 0.52 lbs, in a container measuring 3 in. by 3 in. by 2.15 in. Light enough to carry several sizes on the truck without eating bin space.
How fast can I get the Metallics JSPM14SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSPM14SS come with a warranty?
Absolutely. The Metallics JSPM14SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSPM14SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSPM14SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!