Metallics JSPM9SS 6-32 x 3/4 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.41
$0.41
Metallics JSPM9SS 6-32 x 3/4 in. Pan Head Slotted Machine Screws - 18-8 Stainless - 100qty

Metallics JSPM9SS 6-32 x 3/4 in. Pan Head Slotted Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSPM9SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.41
$0.41
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 3/4 in. Pan Head Slotted Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Pan head with slotted Drive
    • 18-8 Stainless Material
    • 6-32 Diameter, 3/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.072 - 0.082 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.256 - 0.27 in.
Fastener Length:
4-Mar
Hardness:
Rockwell BBS-B9S
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.35 lbs
Product Width:
3 in
Slot Depth:
0.037 - 0.05
Slot Width:
0.039 - 0.048
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SPM
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSPM9SS – Frequently Asked Questions

1) Will a 6-32 x 3/4 in. machine screw work for mounting device plates and switch covers in a standard electrical box?
6-32 is the standard thread used on outlet boxes, device yokes, and cover plates, and the Metallics JSPM9SS is a 6-32 thread with 32 threads per inch, so it mates with those tapped holes. At 3/4 inch long it gives extra reach for mounting through plaster rings, mud rings, or spacers where the stock screw is too short. For flush device plates on a box face, a shorter 6-32 is usually the better choice.
2) Are these Metallics 6-32 screws stainless, and can they be used outdoors or in a damp location?
The JSPM9SS screws are 18-8 stainless, the common austenitic grade used where plated steel would rust. That makes them suitable for damp and exterior enclosures, wet-location covers, and coastal or washdown areas. Note that 18-8 is non-magnetic, so a magnetic screwdriver tip will not hold them.
3) Do these screws meet a dimensional standard for government or federally funded work?
Dimensions conform to ASME B18.6.3-2010, the standard for machine screws and tapping screws, with material called out to SAE. The JSPM9SS is also flagged ARRA compliant and Buy American compliant, which is what a public agency or institutional procurement office needs to see on the submittal.
4) How are these Metallics machine screws packaged and what is the minimum order?
They come in a jar, with a minimum order of 100 count. That is a shop or truck-stock quantity rather than a single fastener, which is how most electrical contractors and MRO stockrooms want 6-32 hardware. Other sizes and quantities are available by request.
5) How strong are 18-8 stainless 6-32 pan head machine screws?
Tensile strength on these runs 80,000 psi minimum, with hardness given as Rockwell BBS-B9S. Stainless machine screw strength values are approximations, since there is no single performance standard for stainless machine screws, so for a structural or load-bearing connection use a fastener with a published grade rather than relying on these numbers.
6) Will stainless 6-32 screws gall or seize when threaded into a stainless enclosure?
18-8 against 18-8 can gall, which is a known trait of austenitic stainless, so drive them slowly and use an anti-seize compound when threading into stainless tapped holes or stainless nuts. Into steel boxes, plated yokes, or aluminum enclosures that is not a concern, though stainless in contact with aluminum in a wet exterior location invites galvanic corrosion at the joint.
How fast can I get the Metallics JSPM9SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSPM9SS come with a warranty?
Absolutely. The Metallics JSPM9SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSPM9SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSPM9SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!