Metallics JSPM11SS 6-32 x 11/4...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.49
$0.49
Metallics JSPM11SS 6-32 x 11/4 in. Pan Head Slotted Machine Screws - 18-8 Stainless - 100qty

Metallics JSPM11SS 6-32 x 11/4 in. Pan Head Slotted Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSPM11SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.49
$0.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 11/4 in. Pan Head Slotted Machine Screws - 18-8 Stainless - 100qty

  • Features

    • Pan head with slotted Drive
    • 18-8 Stainless Material
    • 6-32 Diameter, 11/4" Length

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Slotted
Driver Size:
#2
Fastener Head Height:
0.072 - 0.082 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.256 - 0.27 in.
Fastener Length:
1/1/04
Hardness:
Rockwell BBS-B9S
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.51 lbs
Product Width:
3 in
Slot Depth:
0.037 - 0.05
Slot Width:
0.039 - 0.048
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SPM
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSPM11SS – Frequently Asked Questions

1) Do these Metallics screws meet Buy American and ARRA requirements for a public project?
The JSPM11SS is flagged compliant for both Buy American and ARRA, which is what a government, school, or healthcare procurement file usually needs on a fastener line item. Head and thread geometry are built to ASME B18.6.3-2010 with SAE material standard, so the dimensions match what a drawing calling out a standard 6-32 pan head slotted screw expects.
2) What screwdriver do I need for these Metallics pan head screws?
A #2 driver, and it has to be a flat blade, not a Phillips. The JSPM11SS uses a slotted drive with a slot width of 0.039 to 0.048 in. and a slot depth of 0.037 to 0.05 in. A #2 slotted tip or a standard electrician's flat screwdriver seats correctly; an oversized blade will ride out of the slot.
3) Are 18-8 stainless machine screws OK for outdoor or damp-location work?
18-8 stainless is the usual choice for wet, damp, and exterior locations because it resists rust without plating, so these hold up in outdoor boxes, coastal-adjacent sites, wash-down areas, and damp mechanical rooms where a plated steel screw will bloom rust and seize. For heavily chlorinated or marine-immersion service, 316 stainless is the step up.
4) Will the pan head sit flush enough under a device cover plate?
A pan head is a raised, low-profile head, not a countersunk one, so it sits on top of the surface rather than flush into it. Head height runs 0.072 to 0.082 in. and head width 0.256 to 0.27 in., so it clears easily under most cover plates but will not disappear into a countersunk hole. If you need flush, use a flat head machine screw instead.
5) How are these 6-32 stainless screws packaged and what is the minimum order?
They come in a jar, 100 count, and 100 CT is the order minimum. Jar packaging is the practical format for a service van or a shop bin, since you are pulling two or three at a time per device. Jar weight is 0.51 lbs.
6) How strong is a stainless 6-32 machine screw compared to a plated steel one?
Tensile strength on these runs 80,000 psi minimum with a Rockwell BBS-B9S hardness. Metallics notes that tensile values for stainless screws are approximations, since there is no single performance standard for stainless machine screws. Practical read: fine for device mounting, cover plates, brackets, and light fixture hardware, but a hardened alloy screw is the choice where you need high clamp load on a structural connection.
How fast can I get the Metallics JSPM11SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSPM11SS come with a warranty?
Absolutely. The Metallics JSPM11SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSPM11SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSPM11SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!