Metallics JTEK15P 8 x 1-1/2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.29
$0.29
Metallics JTEK15P 8 x 1-1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 100qty

Metallics JTEK15P 8 x 1-1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTEK15P
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.29
$0.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 1-1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • #2 Drill Point
    • Pan Head with Phillips Drive
    • 8 Diameter, 1-1/2" Length

  • Additional Notes

    • Other sizes and quantities available by request | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.105 - 0.115 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.306 - 0.322 in.
Fastener Length:
1/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C32-40
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Hd_Phil_Self-Drill_TS_Steel_and_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Panel Thickness:
0.035 - 0.100 IN
Phillips Recess Diameter:
0.175
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.74 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.071 - 0.097
Screw Point Type:
Drill Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
SAE J78 - 2013
Torsional Strength:
42 lb-in minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEK
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics JTEK15P – Frequently Asked Questions

1) Do I need to drill a pilot hole for a #8 x 1-1/2 in. Metallics JTEK pan head screw?
No pilot needed. It is a Type BSD self-drilling and tapping screw with a drill point, so the point cuts the hole and the 18 threads-per-inch thread forms its own mating thread in one pass. Just hold it square and let the point bite before applying full pressure.
2) Will the pan head on these screws sit flush, or do I need a flat head?
Pan head, so it sits on top of the surface rather than countersinking. Head width runs 0.306 to 0.322 in. and head height 0.105 to 0.115 in., which gives a broad bearing face good for clamping sheet metal, straps, and clips. If you need the fastener flush or flat to the surface, a pan head is the wrong choice.
3) Can I use the Metallics JTEK15P on a federally funded job with domestic sourcing requirements?
No. The JTEK15P is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. On a job with domestic content requirements you need a domestically sourced drill screw instead.
4) What driver bit do I need for the Metallics JTEK15P screws?
A #2 Phillips bit. The recess is a Phillips drive with a 0.175 in. recess diameter and a gaging depth of 0.071 to 0.097 in., so a worn or undersized bit will cam out and strip the recess. Keep a fresh #2 in the gun.
5) How many #8 x 1-1/2 in. Metallics self-drilling screws come in a jar?
They ship in a jar with a 100-piece minimum order quantity. The jar itself weighs 0.74 lbs. Other sizes and quantities are available by request.
6) How much torque can a Metallics JTEK15P screw take before it snaps?
Minimum torsional strength is 42 lb-in, with the screw case-hardened to Rockwell C32-40. In practice that means setting the clutch on your screw gun rather than driving it hard into the stop, since a self-drilling point that stalls in thick stock is what twists heads off.
7) What standards do these #8 self-drilling tapping screws meet for a spec submittal?
Dimensions conform to ASME B18.6.3-2010 and the thread to SAE J78 - 2013. Note that SAE J78 does not cover #7 diameter drill screws, so if a drawing calls out a #7 you will not find a J78 reference for it. These are a #8 diameter, 1-1/2 in. length.
8) Is a 1-1/2 inch self-drilling screw too long for attaching straps to sheet metal duct?
For thin stock it often is. With a panel thickness range of 0.035 to 0.100 in., a 1-1/2 in. length leaves most of the screw protruding past the back of the material, which is fine when you are fastening through a strap, clip, box, or standoff but a hazard inside ductwork or a finished cavity. Use a shorter length in the same Metallics JTEK pan head Phillips drill screw family when total stack-up is thin.
How fast can I get the Metallics JTEK15P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEK15P come with a warranty?
Absolutely. The Metallics JTEK15P is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEK15P?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEK15P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!