Viega 90150 MegaPress tee Smar...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$454.29
$404.29

Viega 90150 MegaPress tee Smart Connect technology 316 stainless steel, 1-1/2'' x 1-1/2'' x 3/4''

(No reviews yet) Write a Review

Model: 90150
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$454.29
$404.29
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
90150 Viega MegaPress tee Smart Connect technology 316 stainless steel, 1-1/2'' x 1-1/2'' x 3/4''

Manufacturer Resources

Product Specs

Connection Type:
P1 x P2 x P3
Material Type:
316 Stainless Steel
Product Dimension:
1-1/2'' x 1-1/2'' x 3/4''
Department:
Plumbing
Product Group:
Plumbing Fittings
Product Subgroup:
Tees
Product Type:
Tee
Product Length:
6.953"
Product Height:
2.437"
Product Weight:
1.536 lbs
Product Width:
3.874"
Product Material:
316 stainless steel

Viega 90150 – Frequently Asked Questions

1) What pipe sizes does the Viega MegaPress 90150 tee connect?
The 90150 MegaPress tee is a 1-1/2 inch x 1-1/2 inch x 3/4 inch reducing tee. The run is 1-1/2 inch on both ends with a 3/4 inch branch outlet, so it lets you take a 3/4 inch branch off a 1-1/2 inch main without breaking the line size. All three ends are press connections (P1 x P2 x P3), not threaded and not grooved.
2) Is the Viega 90150 tee stainless or carbon steel, and where should it be used?
It is 316 stainless steel, the corrosion resistant grade in the MegaPress line. That makes it the version to spec for wet or corrosive service and for stainless pipe systems, rather than the black-iron style carbon steel MegaPress fittings used on gas and hydronic steel pipe. If your piping is carbon steel, match the fitting material to the pipe instead of mixing in a stainless tee.
3) Do I need a special press tool jaw for the 1-1/2 inch ends on this MegaPress tee?
The ends are press fittings, so they are made with a press tool and the jaw or ring set that matches each end size. A 1-1/2 inch x 1-1/2 inch x 3/4 inch tee needs the 1-1/2 inch pressing ring and actuator for the run plus the 3/4 inch jaw for the branch, so plan for both sizes on the truck before the joint goes in. No threading, soldering or welding is involved.
4) How much room do I need to fit the Viega 90150 tee in a tight ceiling or chase?
Allow for a fitting measuring 6.953 inches in length, 3.874 inches in width and 2.437 inches in height. That footprint is the body alone, so add clearance around each end for the press tool jaw to close squarely, which is usually the real constraint in a chase rather than the fitting itself. It weighs 1.536 lbs, light enough to hold in place single-handed while pressing.
5) What is Smart Connect on the Viega 90150 and why does it matter on inspection?
Smart Connect is the feature in the fitting that leaves an unpressed joint deliberately leaking during pressure test, so an inspector or the installer can see a connection that was missed before the ceiling closes. On a 1-1/2 inch main with a 3/4 inch branch that is the difference between finding the bad joint at test and finding it after drywall.
6) Can I use a press tee like this instead of a threaded or welded branch on 1-1/2 inch steel pipe?
That is the main reason to pick it. A press tee makes a cold joint, so there is no torch, no hot work permit and no threading on site, which is why it gets used in occupied buildings and finished spaces. The tradeoff is that you need the matching press tool on hand for both the 1-1/2 inch run and the 3/4 inch branch; a threaded tee needs no tool investment but takes far longer per joint and gives you a thread to seal.
7) Is the Viega MegaPress 90150 tee made in Germany?
Yes, the 90150 stainless MegaPress tee is manufactured in Germany. That is worth noting on public and institutional work where country of origin has to be documented in the submittal package.
8) Is the MPN for the 1-1/2 x 1-1/2 x 3/4 stainless MegaPress tee 90150?
Correct. Viega part number 90150 is the 316 stainless steel MegaPress tee sized 1-1/2 inch x 1-1/2 inch x 3/4 inch. Order by that number to avoid landing on the carbon steel MegaPress equivalent or a full-size 1-1/2 inch tee.
How fast can I get the Viega 90150 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 90150 come with a warranty?
Absolutely. The Viega 90150 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 90150?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Viega 90150 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.