You may also like
90535 Viega MegaPress 45° elbow Smart Connect technology 316 stainless steel, 3'' x 3''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2
- Country Of Origin:
- Made In Germany
- Material Type:
- 316 Stainless Steel
- Product Dimension:
- 3'' x 3''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Elbows
- Product Type:
- Elbow
- Product Length:
- 9.22"
- Product Height:
- 4.181"
- Product Weight:
- 3.542 lbs
- Product Width:
- 6.756"
Viega 90535 – Frequently Asked Questions
1) Is the Viega 90535 elbow stainless or carbon steel?
It is 316 stainless steel. That is the corrosion resistant grade, which is what you want where the carbon steel MegaPress body would be a problem, such as wet or chemically aggressive environments.
2) Do I need to cut and thread or weld to install the Viega 90535?
No. Both ends of this 3 inch 45 are press connections, so the joint is made cold with a press tool and jaw. No threading, no torch, no hot work permit.
3) What is Smart Connect on the Viega MegaPress 3 inch elbow and why does it matter on a big job?
Smart Connect is the feature built into the sealing element of the 90535 so that an unpressed joint leaks visibly during pressure test rather than passing inspection and failing later. On a run with a lot of 3 inch fittings, that is how you find the one connection the crew missed before the ceiling closes.
4) How much room do I need to fit a 3 inch MegaPress 45 elbow in a tight ceiling?
Plan around 9.22 inches long, 6.756 inches wide and 4.181 inches high for the 90535. On top of that footprint you need clearance for the press jaw to swing around the collar of each end, so lay out your hangers with the tool in mind, not just the fitting.
5) Should I use a 45 degree elbow or two 90s for an offset in 3 inch pipe?
A pair of 45s like the 90535 is the normal way to jog around an obstruction. It gives you a gentler direction change and less flow restriction than stacking 90s, and it keeps the offset shallow. Use a 90 when you actually need a square turn at a wall or riser.
6) How heavy is the Viega 90535 elbow for overhead support planning?
3.542 lbs bare. That is the fitting alone, before pipe and media, so figure it into your hanger spacing when the 45 sits in a horizontal overhead run.
7) What is the manufacturer part number and where is the Viega 3 inch stainless 45 made?
Part number 90535, made in Germany. That is the number to quote when you are matching the rest of a MegaPress stainless package.
How fast can I get the Viega 90535 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 90535 come with a warranty?
Absolutely. The Viega 90535 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 90535?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 90535 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.