You may also like
91155 Viega MegaPress reducer Smart Connect technology 316 stainless steel, 1-1/2'' x 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- FTG x P
- Material Type:
- 316 Stainless Steel
- Product Dimension:
- 1-1/2'' x 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Reducers
- Product Type:
- Reducer
- Product Length:
- 4.15"
- Product Height:
- 1.902"
- Product Weight:
- 0.657 lbs
- Product Width:
- 1.902"
- Product Material:
- 316 stainless steel
Viega 91155 – Frequently Asked Questions
1) What do the FTG x P ends on the Viega 91155 MegaPress reducer mean for how it connects?
The 91155 is an FTG x P configuration. The FTG end is sized to slip into another fitting's press socket, and the P end is a press socket that receives pipe. So it is not two pipe sockets, it is one male fitting end and one press end, which matters if you were planning to join it directly to two pipe runs.
2) Is the Viega 91155 reducer stainless or carbon steel?
316 stainless steel. That is the corrosion resistant grade, so it suits stainless press systems and wet or chemically aggressive service rather than the black iron and carbon steel side of the MegaPress line. Do not mix it into a carbon steel press run without confirming the rest of the system is stainless.
3) Does the Viega MegaPress 91155 need threading or welding to install?
No. It is a press fitting with Smart Connect technology, so the joint is made cold with a press tool and the matching jaw for the size. No threading, no soldering, no hot work permit. You still need the correct jaw or ring for both the 1-1/2 inch and 3/4 inch ends, and those are separate from the fitting.
4) Is the Viega 91155 a tee or a straight reducer?
The 91155 is a reducing fitting that steps 1-1/2 inch to 3/4 inch with FTG x P ends, so it transitions between two sizes rather than branching a run. If you need a branch off a 1-1/2 inch main, you want a MegaPress stainless tee instead.
5) How much does the Viega 91155 MegaPress reducer weigh?
0.657 lbs each. Light enough that a run of them adds little load, but on a stainless press job where you are ordering by the box it is worth the figure for freight and for sizing supports on larger assemblies.
How fast can I get the Viega 91155 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 91155 come with a warranty?
Absolutely. The Viega 91155 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 91155?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 91155 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.