You may also like
91270 Viega MegaPress reducer Smart Connect technology 316 stainless steel, 3/4'' x 1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2
- Material Type:
- 316 Stainless Steel
- Product Dimension:
- 3/4'' x 1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Reducers
- Product Type:
- Reducer
- Product Length:
- 3.457"
- Product Height:
- 1.496"
- Product Weight:
- 0.322 lbs
- Product Width:
- 1.496"
- Product Material:
- 316 stainless steel
Viega 91270 – Frequently Asked Questions
1) What size pipe does the Viega MegaPress 91270 reducer connect?
The Viega 91270 MegaPress fitting is a 3/4 inch by 1/2 inch reducer, so it takes a 3/4 inch run down to 1/2 inch. Both ends are press connections (P1 x P2), not threaded or grooved.
2) Is the Viega 91270 MegaPress fitting stainless steel or carbon steel?
It is 316 stainless steel, which is the grade Viega uses for corrosive service and wash-down or coastal environments rather than the plain carbon steel MegaPress line. If your spec calls for carbon steel black iron pipe fittings, this is not the matching part.
3) Does the Viega 91270 press fitting have Smart Connect, and what does that actually do on the job?
Yes, the 91270 carries Viega's Smart Connect feature. On an unpressed connection it lets the test medium escape past the seal during pressure testing, so an installer can find the fitting that was missed before the system goes into service. It does not change the pressed joint itself.
4) How much room do I need to fit the Viega 91270 reducer in a tight chase?
The fitting measures 3.457 inches on its length and 1.496 inches on height and width, and weighs 0.322 lbs. Allow for that plus the jaw clearance of your press tool when laying out close to joists or inside a wall cavity.
5) Is Viega 91270 the right part number to order for a 3/4 x 1/2 stainless MegaPress reducer?
Yes. 91270 is the manufacturer part number, and it is the 3/4 inch by 1/2 inch 316 stainless MegaPress reducer. One part number covers the item, there are no finish or configuration options to specify.
6) Where is the Viega 91270 MegaPress fitting made?
Germany. For agencies and institutional buyers tracking country of origin on submittals, the 91270 is listed as made in Germany.
How fast can I get the Viega 91270 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 91270 come with a warranty?
Absolutely. The Viega 91270 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 91270?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 91270 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.