You may also like
91905 Viega MegaPress tee Smart Connect technology 316 stainless steel, 2'' x 2'' x 1''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x FPT
- Material Type:
- 316 Stainless Steel
- Product Dimension:
- 2'' x 2'' x 1''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 7.677"
- Product Height:
- 2.913"
- Product Weight:
- 2.241 lbs
- Product Width:
- 4.016"
- Product Material:
- 316 stainless steel
Viega 91905 – Frequently Asked Questions
1) What are the three outlet sizes on the Viega MegaPress 91905 tee?
The Viega 91905 is a 2 inch x 2 inch x 1 inch tee. The two 2 inch run ends are press connections and the 1 inch branch is female pipe thread, given as P1 x P2 x FPT. So the run presses onto 2 inch pipe and the branch takes a threaded 1 inch male fitting or nipple.
2) Is the Viega 91905 MegaPress tee stainless or carbon steel?
It is 316 stainless steel, the higher-alloy grade used where corrosion resistance matters. That puts it in Viega's MegaPressG/stainless line rather than the carbon steel MegaPress fittings, so pair it with stainless pipe and stainless supports to avoid mixing metals.
3) Do I need a special press tool jaw for a 2 inch MegaPress fitting?
Yes. The 2 inch run ends on the 91905 press with Viega MegaPress 2 inch press rings and an adapter jaw rather than a standard small-size jaw. Only the 1 inch branch is threaded, so that side needs a pipe wrench and thread sealant instead of the tool.
4) What does Smart Connect on this Viega tee actually do for me on the job?
Smart Connect is Viega's unpressed-connection feature: an unpressed joint leaks visibly during pressure test so you can find the one you missed before the wall closes. On the 91905 that applies to the two 2 inch press ends; the 1 inch threaded branch is checked the usual way.
5) Can I use the 1 inch branch on this MegaPress tee for a gauge, drain or sensor?
That is exactly what the female thread is for. The 1 inch FPT branch takes a threaded nipple, valve, drain, gauge or thermowell directly, so you can tap a 2 inch stainless run for an instrument or drop without cutting in a second fitting.
6) Is the Viega 91905 made in the USA?
No, the 91905 MegaPress tee is made in Germany. Worth knowing if your project carries a domestic-sourcing requirement on piping components.
7) What part number should I order for a 2 x 2 x 1 stainless MegaPress tee?
Order Viega part number 91905. That number covers the 316 stainless MegaPress tee in 2 inch x 2 inch x 1 inch with press run and female threaded branch.
How fast can I get the Viega 91905 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 91905 come with a warranty?
Absolutely. The Viega 91905 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 91905?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 91905 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.