You may also like
95145 Viega MegaPress tee Smart Connect technology 304 stainless steel, 1-1/2'' x 1-1/2'' x 1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x P3
- Material Type:
- 304 Stainless Steel
- Product Dimension:
- 1-1/2'' x 1-1/2'' x 1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 6.953"
- Product Height:
- 2.437"
- Product Weight:
- 1.532 lbs
- Product Width:
- 3.752"
- Product Material:
- 304 stainless steel
Viega 95145 – Frequently Asked Questions
1) What pipe sizes does the Viega MegaPress 95145 tee connect?
The 95145 MegaPress tee is a reducing tee sized 1-1/2 inch x 1-1/2 inch x 1/2 inch, so the run stays at 1-1/2 inch and the branch drops to 1/2 inch. All three outlets are press ends (P1 x P2 x P3), so there is no threading or welding at any of the three connections.
2) Is the 95145 MegaPress tee carbon steel or stainless?
It is 304 stainless steel, not carbon steel. That matters if you are pressing into a stainless system or a job where the carbon steel MegaPress body would be the wrong material for the line. Match the fitting material to the pipe you are pressing onto.
3) How much clearance do I need to install a 1-1/2 inch MegaPress stainless tee in a tight ceiling or chase?
Plan around the fitting envelope: 6.953 inches long, 3.752 inches wide and 2.437 inches high for the 95145 tee. On top of that you need room to get the press jaw fully around each of the three press ends and rotate it, which is usually the limiting factor in a joist bay or wall cavity rather than the fitting itself.
4) What does Smart Connect do on a MegaPress fitting, and why does it matter on an unpressed joint?
Smart Connect is Viega's feature that leaves an unpressed connection deliberately leaky when the system is pressure tested, so a joint you missed shows itself during test rather than after the ceiling is closed. On a three-outlet fitting like the 95145 that is worth knowing, since it is easy to press two ends and walk away from the 1/2 inch branch.
5) Do I need a separate press tool jaw for the 1/2 inch branch on this tee?
Yes. Press jaws are size specific, so you need a 1-1/2 inch jaw or ring for the two run ends and a 1/2 inch jaw for the branch on the 95145. Crews pressing a reducing tee with only the large jaw on the truck end up leaving the branch unpressed.
How fast can I get the Viega 95145 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 95145 come with a warranty?
Absolutely. The Viega 95145 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 95145?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 95145 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.