You may also like
95290 Viega MegaPress coupling With stop Smart Connect technology 304 stainless steel, 3/4'' x 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2
- Material Type:
- 304 Stainless Steel
- Product Dimension:
- 3/4'' x 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Couplings
- Product Type:
- Coupling
- Product Length:
- 3.012"
- Product Height:
- 1.496"
- Product Weight:
- 0.289 lbs
- Product Width:
- 1.496"
- Product Material:
- 304 stainless steel
Viega 95290 – Frequently Asked Questions
1) What size pipe does the Viega MegaPress 95290 coupling press onto?
The MegaPress 95290 is a 3/4 inch by 3/4 inch coupling, so it joins two runs of 3/4 inch pipe with a press connection on each end (P1 x P2). Both ends are the same size, so it is a straight coupling, not a reducer.
2) What is the difference between a MegaPress coupling with stop and one without a stop?
With stop means there is an internal shoulder in the middle of the coupling body. Each pipe end butts against that shoulder, which sets the insertion depth for you on both sides. The 95290 is the with-stop version. A stopless coupling has no shoulder, so it can be slid along a pipe and is used for repairs or where you cannot pull the pipe apart. For a normal new joint between two pipe ends, the with-stop 95290 is the one you want.
3) Can I use the Viega 95290 coupling on black iron gas pipe or only on water lines?
The 95290 is a MegaPress fitting, which is Viega's press system for black iron and carbon steel pipe rather than copper. It is built in 304 stainless steel, so it is a press-to-steel-pipe coupling. Note that this is the 304 stainless body version, not the MegaPressG gas-specific variant, so match it to the service the engineer or the AHJ specifies for the line.
4) What does Smart Connect technology actually do on a MegaPress fitting?
Smart Connect is Viega's feature that lets an unpressed connection be identified during pressure testing: an unpressed fitting leaks visibly instead of holding, so a missed press shows up before the wall closes. On a 3/4 inch coupling in a long run that is the difference between finding the miss at test and finding it later.
5) How much room do I need to fit the Viega 95290 3/4 inch press coupling in a tight chase?
The body measures 3.012 inches in length and 1.496 inches across in both the height and width dimensions. The 1.496 inch outside figure is what matters for clearance to a joist, stud face, or an adjacent pipe, and you also need to allow room for the press jaw to seat squarely around the full circumference.
6) Is the Viega MegaPress 95290 coupling stainless steel or carbon steel?
304 stainless steel body. For a maintenance crew standardizing a mechanical room, that is a corrosion-resistant body on a steel pipe press system, and it is manufactured in Germany.
How fast can I get the Viega 95290 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 95290 come with a warranty?
Absolutely. The Viega 95290 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 95290?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 95290 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.