Altronix AL802ULADA NAC Power ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$800.60
$649.83
Altronix AL802ULADA NAC Power Extender, Input 120VAC 60Hz at 5A, Class 2 Rated Power Limited Outputs, Red Enclosure

Altronix AL802ULADA NAC Power Extender, Input 120VAC 60Hz at 5A, Class 2 Rated Power Limited Outputs, Red Enclosure

(No reviews yet) Write a Review

Model: AL802ULADA

In Stock (leaves warehouse same day if ordered before 3pm ET)

$800.60
$649.83
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Current:
8A
Features:
To be connected to any 24V Fire Alarm Control Panel, Providing Auxiliary Power to Support System Accessories
Includes:
Includes Enclosure, 2 Class A or 4 Class B Outputs
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix AL802ULADA – Frequently Asked Questions

1) What is the Altronix AL802ULADA used for on a fire alarm system?
The AL802ULADA is a NAC power extender. It ties into any 24V fire alarm control panel and supplies auxiliary power to support system accessories, so notification appliances and add-on devices draw from the extender instead of pulling the panel's own supply past its limit. It is a commercial-grade device, not a residential plug-in supply.
2) How many notification circuits does the Altronix AL802ULADA support, and can I run Class A?
Either configuration works. The AL802ULADA gives you 2 Class A outputs or 4 Class B outputs, so a loop-style Class A layout that returns to the unit is supported without adding a separate module. Decide the wiring class before you pull cable, since Class A doubles the conductor run back to the extender.
3) How much current can the AL802ULADA supply to notification appliances?
Rated at 8A total. That is the figure to budget against when you add up strobe and horn/strobe candela draws across the circuits, and it is the number to work from when splitting load between 2 Class A or 4 Class B outputs.
4) What should I use instead of the Altronix AL802ULADA if I need power for access control locks rather than a fire alarm notification circuit?
The Altronix AL802ULADA is built to connect to a 24V Fire Alarm Control Panel and provide auxiliary power to support system accessories, so it is aimed at notification appliance circuits rather than door hardware. For access control door power, the Von Duprin PS902 base power supply is 2A at 12/24 VDC field selectable for access control, and the RCI DKPS-2A offers 8 outputs at 12/24VDC and 2A for access control systems. Either of those is the direction to go when the load is strikes, mags and controllers rather than a fire panel.
5) Will the Altronix AL802ULADA run motorized latch retraction exit devices?
The AL802ULADA is a NAC power extender intended for connection to a 24V Fire Alarm Control Panel and for auxiliary power to system accessories, so it is not the unit specified for latch retraction inrush. For motorized latch retraction exit devices, the BEST RPSMLR2 Series power supply is built for that application, and the BEST ELR150 Series is a power supply control module for electronic access control if you are switching electric latch retraction or strikes.
6) Does the Altronix AL802ULADA need a separate enclosure or backbox?
No separate box to buy. The AL802ULADA ships with its enclosure, so what you are mounting is a complete assembly ready for the wall next to the panel.
7) What input power does the Altronix AL802ULADA need at the wall?
Standard 120V line power. Run a dedicated branch circuit to the extender per your fire alarm installation requirements; there is no 240V version of this model.
8) What is the closest alternative to the AL802ULADA if I need higher amperage for electrified exit devices?
For exit device power rather than notification circuits, look at the BEST PS161-6, a 120V input supply with 12/24V output at 6A capacity intended for delayed egress exit devices, or the SDC 634 Series at 4A with dual voltage selection. Neither is a NAC extender; they are door hardware supplies, so they do not replace the AL802ULADA on a fire alarm notification circuit.
9) Is the Altronix AL802ULADA overkill for a single electrified lock, and what is a smaller option?
The AL802ULADA is rated at 8A with a 120V input, which is more capacity than one door needs. For a single opening, the Command Access PS1 is a 24VDC linear power supply with 1 amp output, the SDC 620 Series is a 1 amp regulated and filtered low voltage supply with dual voltage selection, and the Securitron AQD1 is a 12/24 VDC switching supply at 1 amp. The ROFU 9126T is a plug in mini supply at 12 VDC and 1.5A with time delay if you want a cord connected unit.
10) What is the closest match to the Altronix AL802ULADA if I need similar amperage for a security system rather than a fire panel?
The AL802ULADA carries an 8A rating from a 120VAC 60Hz input. In similar territory on capacity, the Securitron AQS1210 is a switching supply at 12 VDC and 10 amps, the BEST PS161-6 runs a 120V input to 12/24V output at 6A capacity, and the SDC 634 Series is a 4 amp regulated and filtered low voltage supply with dual voltage selection. Those are general security and door power units, while the Altronix is configured with Class 2 rated power limited outputs for notification circuits.
11) I need battery backup on my door power - does the Altronix AL802ULADA cover that or should I look elsewhere?
The AL802ULADA ships with an enclosure and 2 Class A or 4 Class B outputs for fire alarm notification duty. If your requirement is a door power supply with standby batteries, the Adams Rite PS-1 is a regulated 1 amp 12/24 volt DC supply with battery backup, the Command Access PS204/204B is a linear supply with 2A at 24VDC and battery backup, and the Detex 10-800 Series pairs a universal logic controller with a 120VAC/24VDC power supply and battery backup.
12) What products look like alternatives to the Altronix AL802ULADA but will not do the same job?
A few nearby items serve different purposes. The ROFU 10305-LA is a power transfer hinge rated 1.5A at 42V - it moves power through the door edge, it does not generate it. The Command Access CAT Field Tester is a portable 12-24VDC supply that runs off DeWalt, Makita and Milwaukee batteries, which is a bench and troubleshooting tool. The Securitron BPSS is a boxed solar power supply for sites without line voltage. The AL802ULADA itself is a hardwired 120V unit rated 8A that is intended for commercial installation.
13) For a mid-size access control job, what are the alternatives to the Altronix AL802ULADA in the 1.5 to 4 amp range?
The AL802ULADA is an 8A unit configured for fire alarm notification support. If you are sizing a door power supply in the middle of the range, the SDC 631 Series is a 1.5 amp regulated and filtered DC power controller with dual voltage selection, the SDC 632 Series is the 2 amp version, the Securitron AQL4 is a 12/24VDC switching supply at 4/3 amps, and the Command Access PS210 is a UL 6E/CSA linear supply with 1.5A at 24VDC and boost circuitry.
14) What is a boxed enclosure alternative to the Altronix AL802ULADA for a maglock bank?
The AL802ULADA comes with its own enclosure and is wired as 2 Class A or 4 Class B outputs for fire alarm notification circuits. For a bank of magnetic locks, the Locknetics LP Series 150 and 250 power supply also comes with an enclosure, and the RCI DKPS-2A gives you 8 outputs at 12/24VDC and 2A so a group of doors can be fed and fused from one box.
How fast can I get the Altronix AL802ULADA delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix AL802ULADA come with a warranty?
Absolutely. The Altronix AL802ULADA is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix AL802ULADA?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix AL802ULADA from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!