Altronix ALTV244 CCTV Power Su...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$210.67
$139.50

Altronix ALTV244 CCTV Power Supply, Input 115VAC 50/60Hz at 0.9A, 4 Fuse Protected Outputs, 24VAC at 4A or 28VAC at 3.5A, Grey Enclosure

(No reviews yet) Write a Review

Model: ALTV244

In Stock (leaves warehouse same day if ordered before 3pm ET)

$210.67
$139.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Current:
4A
Features:
Provides 24VAC or 28VAC VAC Distributed via Four (4) Fuse Protected Outputs for Powering CCTV Cameras
Includes:
Includes Enclosure, 4 Fused Outputs
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix ALTV244 – Frequently Asked Questions

1) How many cameras can I run off one ALTV244?
Four fused outputs, so four camera runs off a single unit, each individually fuse protected so a short on one run doesn't drop the others. Total current available is 4A, so add up the draw of the cameras plus any heaters or blowers and keep the sum under that.
2) Can I use the ALTV244 to power maglocks, strikes, or an access control panel?
No. It's an AC output supply built for CCTV cameras, and locking hardware wants filtered DC. For door hardware use a DC supply such as the Von Duprin PS902 (2A, 12/24VDC field selectable) or the SDC 634 Series 4 amp regulated and filtered low voltage supply.
3) I need DC power for a maglock, not AC for cameras. What should I use instead of the Altronix ALTV244?
The ALTV244 puts out 24VAC or 28VAC through four fuse protected outputs for powering CCTV cameras, so it is the wrong output type for a DC maglock or electric strike. For DC loads, the Securitron AQL4 is a switching supply rated 12/24VDC at 4/3 amps, and the SDC 634 Series is a 4 amp regulated and filtered low voltage supply with dual voltage selection. The Von Duprin PS902 base power supply is field selectable 12/24VDC at 2 amps if the load is smaller.
4) Will the Altronix ALTV244 run a motorized latch retraction exit device?
No. The ALTV244 supplies 24VAC or 28VAC for CCTV cameras, and latch retraction hardware needs a supply built for its inrush profile. The BEST RPSMLR2 Series is a power supply made specifically for motorized latch retraction exit devices. For delayed egress exit devices, the BEST PS161-6 takes 120V input and delivers 12/24V output at 6 amp capacity.
5) Our spec calls for a UL listed 12VDC supply for an access control kit. Is the ALTV244 acceptable?
The ALTV244 is a 120V input unit producing 24VAC or 28VAC, so it does not meet a 12VDC requirement. The Aiphone AC-PS1250 is a UL listed 12VDC 5 amp supply built for AC Series access control kits, and the Command Access PS210 is a UL 6E/CSA linear supply rated 1.5A at 24VDC with boost circuitry if the spec allows 24VDC.
6) Why does the ALTV244 give 4A at 24VAC but less at 28VAC?
It's the same transformer capacity split two ways. The unit is rated 4A of output current, and the 28VAC tap trades some of that current for the higher voltage. The 28VAC setting is what you use when long cable runs cause enough voltage drop that 24VAC cameras are browning out at the far end.
7) Do I need to buy a separate enclosure or backplate for the ALTV244?
No. The ALTV244 ships in its own grey enclosure with the four fused outputs already on the board, so it mounts to the wall or backboard as supplied. You supply the conduit, line side wiring, and the camera cabling.
8) Is there a boxed power supply with more than four outputs if I have a larger camera run?
The ALTV244 distributes its 24VAC or 28VAC across four fuse protected outputs and ships with its enclosure. If you need more drops from one box, the RCI DKPS-2A offers eight outputs, though it is a 12/24VDC supply at 2 amps rather than an AC output unit, so it suits DC access control devices rather than AC cameras.
9) What is the closest 4 amp alternative to the Altronix ALTV244?
On amperage, the ALTV244 is rated 4A at 24VAC. The Securitron AQL4 is a switching supply at 12/24VDC rated 4/3 amps and the SDC 634 Series is a 4 amp regulated and filtered low voltage supply with dual voltage selection. Both match the current rating but deliver DC rather than the AC output the ALTV244 provides, so they substitute only where the connected equipment accepts DC.
10) We need a high amperage supply for a bank of doors. What goes above the ALTV244?
The ALTV244 tops out at 4A of 24VAC across its four outputs. For heavier DC loads, the Securitron AQS1210 is a 12VDC switching supply rated 10 amps, and the BEST PS161-6 provides 12/24V output at 6 amp capacity from a 120V input. The Locknetics LP Series is offered in 150 and 250 amp ratings with an enclosure.
11) Which units look like alternatives to the ALTV244 but will not work as a camera power source?
Two to rule out: the ROFU 10305-LA power transfer hinge is a tamper resistant hinge rated 1.5A at 42V for carrying power through a door, not a supply, and the Command Access CAT Field Tester is a portable 12-24VDC tester that runs off DeWalt, Makita and Milwaukee batteries for bench work rather than permanent installation. The ALTV244 is a fixed 115VAC input unit supplied with its enclosure and four fused outputs.
12) Is the ALTV244 suitable for a commercial building install or is it a residential unit?
It is a commercial grade unit, intended for professional security system installs where a camera head end needs multiple protected AC feeds from one 120V circuit.
13) What else takes a 120VAC line input like the ALTV244 if I want to standardize on one feed across the closet?
The ALTV244 runs on a 120V input. Other line fed units are the ROFU 9102-12D UL/9102-24D at 10/120VAC 60Hz input, the BEST PS161-6 at 120V input with 12/24V output, and the Detex 10-800 with a 120VAC/24VDC supply. Standardizing the feed still leaves you to match output type, since the ALTV244 delivers AC and those deliver DC.
How fast can I get the Altronix ALTV244 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix ALTV244 come with a warranty?
Absolutely. The Altronix ALTV244 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix ALTV244?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix ALTV244 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.