Altronix SAV182D DC CCTV Power...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$418.18
$269.19
Altronix SAV182D DC CCTV Power Supply, 115VAC 60Hz at 3A or 230VAC 50Hz at 1.5A Input, 18 PTC Protected Class 2 Outputs 12VDC at 11A Max Total Current, Grey Enclosure

Altronix SAV182D DC CCTV Power Supply, 115VAC 60Hz at 3A or 230VAC 50Hz at 1.5A Input, 18 PTC Protected Class 2 Outputs 12VDC at 11A Max Total Current, Grey Enclosure

(No reviews yet) Write a Review

Model: SAV182D

In Stock (leaves warehouse same day if ordered before 3pm ET)

$418.18
$269.19
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Power Supplies
Current:
11A
Features:
Provides 12VDC Distributed via Eighteen (18) Class 2 Rated PTC Protected Power Limited Outputs for Powering surveillance cameras
Includes:
Includes Enclosure, 18 PTC Class 2 Outputs
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix SAV182D – Frequently Asked Questions

1) How many cameras can the Altronix SAV182D run at once?
The SAV182D distributes 12VDC across eighteen individually PTC protected, Class 2 rated power limited outputs for surveillance cameras, so you can feed up to 18 camera runs from one enclosure. The limit that actually matters is total load: 11A maximum across all outputs combined. Add up the draw of every camera plus its IR illuminator at full night mode, and keep the sum under 11A.
2) Will the SAV182D power a 24VDC camera or a maglock?
No. The SAV182D is a 12VDC-only distribution supply, so 24VDC cameras and 24V locking hardware are out. For dual-voltage work, a field-selectable 12/24VDC supply like the Von Duprin PS902 (2A) or the Securitron AQL4 (12/24VDC, 4/3A) is the right direction. Also worth noting these are Class 2 power limited outputs intended for cameras, not for door locking devices.
3) What should I use instead of the Altronix SAV182D if I need to power locks and doors rather than cameras?
The SAV182D is built to distribute 12VDC to surveillance cameras. For door hardware, the Von Duprin PS902 is a 2A 12/24 VDC base power supply that is field selectable for access control, and the BEST PS161-6 is a 120V input, 12/24V output 6A supply for delayed egress exit devices. Motorized latch retraction devices draw an inrush that calls for the BEST RPSMLR2 series instead.
4) What is the closest alternative to the Altronix SAV182D for a large camera run that needs 10 amps at 12VDC?
The Securitron AQS1210 is a switching power supply rated 12 VDC at 10 amps, which puts it in the same output class as the SAV182D's 11A maximum total current at 12VDC. The difference is distribution: the SAV182D splits its output across eighteen PTC protected Class 2 power limited outputs so each camera gets its own protected run, while the AQS1210 is a single supply. If you want per-camera fusing you would add a distribution board alongside the AQS1210.
5) Does the Altronix SAV182D give 24VDC, or do I need a different supply?
The SAV182D distributes 12VDC across its eighteen outputs. If the devices need 24VDC or a selectable output, look at the SDC 632 Series 2 Amp or SDC 634 Series 4 Amp regulated and filtered supplies with dual voltage selection, the Securitron AQD1 at 12/24 VDC 1 Amp, or the Command Access PS1 Series 24VDC linear supply with 1 amp output.
6) Which multi-output power supply competes with the Altronix SAV182D on a smaller camera job?
The RCI DKPS-2A is the nearest multi-output peer: it carries 8 outputs at 12/24VDC rated 2A for access control systems. The SAV182D carries eighteen PTC protected Class 2 outputs at 12VDC with 11A total, so it is the choice when the output count or the total load exceeds what an eight-output 2A board supports.
7) Do I need fuses or replacement fuses for the Altronix SAV182D outputs?
No fuses to stock. Each of the eighteen outputs is PTC protected, meaning the protection is a self-resetting thermistor: it trips on an overload or short and restores itself once the fault is cleared and the circuit cools. For a camera head installed in a parapet or a pole box, that saves a truck roll every time a tech shorts a lead.
8) Does the Altronix SAV182D come with an enclosure or do I buy that separately?
The enclosure is included, along with the eighteen PTC protected Class 2 output board. It ships as a grey wall-mount cabinet, so budget wall space and a dedicated 120V branch circuit at the head end rather than a separate can.
9) What else could I buy if I only need a handful of camera outputs instead of eighteen?
Step down to a smaller multi-output board. The RCI DKPS-2A gives 8 outputs at 12/24VDC, 2A, which suits a small camera or access job. If you want the 12V amperage but not the eighteen separate protected runs, the Securitron AQS1210 is a 12VDC 10A switching supply. The SAV182D earns its place when you want each camera on its own self-resetting protected output.
10) I only have four cameras. Is there something smaller than the Altronix SAV182D?
Yes. The Securitron AQL4 is a switching power supply at 12/24VDC rated 4 amps at 12V and 3 amps at 24V, and the SDC 634 Series is a 4 amp regulated and filtered low voltage supply with dual voltage selection. Either covers a small camera count without the eighteen output distribution the SAV182D provides at 11A total.
11) Do I need battery backup with the Altronix SAV182D, and what has it built in?
If the cameras must ride through a power loss, supplies that state onboard backup include the Adams Rite PS-1, a regulated 1 amp 12/24 volt DC supply with battery backup, the Command Access PS204/204B linear supply at 2A 24VDC with battery backup, and the Detex 10-800 Series universal logic controller with a 120VAC/24VDC supply and battery backup. Those are far lower in output than the SAV182D's 11A across eighteen outputs, so on a large camera count backup is usually handled separately.
12) Is the ROFU 9126T a substitute for the Altronix SAV182D?
No. The ROFU 9126T is a plug in mini power supply at 12 VDC and 1.5A with time delay, a single small device supply. The SAV182D is an enclosed unit distributing 12VDC through eighteen PTC protected Class 2 outputs at up to 11A total, intended for a bank of surveillance cameras. The ROFU 9102-12D UL/9102-24D with 10/120VAC 60Hz input is likewise a single-output supply, not a multi-camera distribution point.
13) I need a UL listed 12V 5A supply for an access control kit, not a camera bank. What replaces the Altronix SAV182D there?
The Aiphone AC-PS1250 is a 12V DC 5A UL Listed power supply made for AC Series access control kits, which is the right match when you are feeding an intercom and entry kit rather than distributing 12VDC to surveillance cameras the way the SAV182D does across its eighteen outputs.
14) Is the SAV182D a commercial-grade CCTV power supply or something for a home system?
It is built for commercial installs. Eighteen outputs and an 11A total budget in one cabinet is head-end gear for a building or campus camera system, not a two-camera residential job. For a small system, a single-output plug-in supply such as the ROFU 9126T (12VDC, 1.5A) is closer to the right size.
15) What supply voltage does the SAV182D need at the wall?
Standard 120V AC service feeds it. Plan a dedicated branch circuit to the cabinet location, since all eighteen 12VDC camera outputs and the full 11A output budget come off that single input.
16) Is the Command Access CAT Field Tester an alternative to the Altronix SAV182D?
No. The CAT Field Tester is a portable 12-24VDC power supply that runs off DeWalt, Makita and Milwaukee batteries, used to bench-check a device in the field. The SAV182D is a permanently installed commercial supply in a grey enclosure feeding eighteen Class 2 outputs at 12VDC.
How fast can I get the Altronix SAV182D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix SAV182D come with a warranty?
Absolutely. The Altronix SAV182D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix SAV182D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix SAV182D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!