Altronix SMP5 Switching Power ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$68.07
Altronix SMP5 Switching Power Supply Board, 6VDC Application use TP1640, 12VDC Application use T2428100, 24VDC Application use T2428175, 6/12/24VDC at 4A Output

Altronix SMP5 Switching Power Supply Board, 6VDC Application use TP1640, 12VDC Application use T2428100, 24VDC Application use T2428175, 6/12/24VDC at 4A Output

(No reviews yet) Write a Review

Model: SMP5

In Stock (leaves warehouse same day if ordered before 3pm ET)

$68.07
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Power Supply/Charger, Input 115VAC 60Hz at 3.5A, 8 Fused Outputs, 12/24VDC at 6A, Grey Enclosure

AL600ULPD8 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into eight (8) 12VDC or 24VDC non power-limited outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

 

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

 

Altronix Power Supplies are ideal for a multitude of purposes, including:

  • General Use
  • CCTV
  • Fire Alarm
  • POIP

Manufacturer Resources

Product Specs

Warranty:
Lifetime
Subcategory:
Access Power Controller With Power Supplies
Commercial/Residential:
Commercial
Product Group:
Electronic Access Controls
Product Subgroup:
Power Supplies
Product Type:
Boards
Current:
4A
Product Voltage:
120V
Product Category:
Electronic Access Controls
Department:
Door Hardware

Altronix SMP5 – Frequently Asked Questions

1) Can the Altronix SMP5 run 12VDC and 24VDC access control hardware?
The SMP5 switching board is selectable for 6, 12 or 24VDC, so it will feed 12VDC strikes, maglocks and readers as well as 24VDC devices. The voltage you choose drives the transformer choice: T2428100 for 12VDC, T2428175 for 24VDC. It is one voltage at a time, not three simultaneous rails.
2) How much current does the Altronix SMP5 board supply, and will it carry a bank of maglocks?
Rated output is 4A. Add up the holding current of every device on the circuit, including locks, readers and any auxiliary devices, and keep the total under 4A with headroom. A handful of maglocks at roughly half an amp each is within range; a large opening count is not, and you would step up to a higher-amperage supply.
3) I need multiple programmable door functions, not just DC power - what should I look at instead of the SMP5?
The Altronix SMP5 is a switching power supply board; its job is converting 120V input to a 6, 12, or 24VDC output at 4A, and it does not carry programmable logic. If the opening calls for programmable sequencing - electric strike, mag lock, and operator firing in a set order - the Command Access DS1-X multi-function door sequencing relay board offers 13 programmable functions. It still needs a DC source, which is the role the SMP5 fills.
4) What input power does the Altronix SMP5 need at the panel?
It runs off standard 120V line power through its matching transformer, so a dedicated 120VAC circuit at the equipment location is what the electrician needs to provide. The low voltage side is what you select as 6, 12 or 24VDC.
5) For a commercial access control panel, which board handles voltage selection across 6, 12, and 24VDC devices?
The Altronix SMP5 is the piece that sets the supply voltage: it is a commercial switching power supply board selectable for 6VDC, 12VDC, or 24VDC output at 4A, so one board covers hardware at any of those three voltages depending on the matching transformer used with it. The Command Access DS1+ and DS1-X boards operate on 12-24VDC but are sequencing and relay logic rather than voltage sources, so they do not set the system voltage themselves.
6) Is the Altronix SMP5 suitable for a commercial building install or is it a residential-grade part?
It is a commercial-rated power supply board, intended for professional access control and security system work rather than residential use. It is sold as a bare board, so it is meant to be mounted inside an enclosure or an existing cabinet by an integrator.
How fast can I get the Altronix SMP5 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Altronix SMP5 come with a warranty?
Absolutely. The Altronix SMP5 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Altronix SMP5?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Altronix SMP5 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!