Champion 4 One-Piece 1.6 gpf/6.0 Lpf Standard Height Elongated Toilet With Seat
- INDUSTRY-LEADING POWER: Equipped with a large 4-in. flush valve (102 mm) and 2-3/8-in. (60 mm) fully-glazed trapway this one-piece toilet is virtually clog-free
- EASY-CLEAN ONE-PIECE TOILET: Sleek, seamless construction eliminates the crevices where dirt can hide, and EverClean surface inhibits the growth of unpleasant stain and odor-causing buildup
- SLOW-CLOSE TOILET SEAT: Durable toilet seat with slow-close hinge eliminates slamming
- INCLUDES: Chrome trip lever and bolt caps
- 4" (102mm) non-adjustable, piston action Accelerator flush valve
- 12" (305mm) rough-in
- 2-3/8" (60mm) fully-glazed trapway
- Rim height at 15" (381mm)
- 100% factory flush tested
Manufacturer Resources
Product Specs
- Product Type:
- Elongated Toilet
- Product Group:
- Washroom/Bath
- Product Subgroup:
- Toilet
- Department:
- Plumbing
American Standard 2004314.02 – Frequently Asked Questions
1) Is the Champion 4 a comfort height or standard height toilet?
Standard height. The Champion 4 one-piece has a 15 inch (381 mm) rim height, so it sits lower than the roughly 16-1/2 to 17 inch ADA/comfort-height bowls. If you are specifying for accessibility in a commercial or multi-family unit, a right-height bowl is the one to order; for a residential replacement matching older fixtures, 15 inches is what you already have.
2) Does the American Standard Champion 4 toilet come with a seat, or do I have to buy one separately?
The seat is included. It is an elongated seat with a slow-close hinge, so it will not slam. A chrome trip lever and bolt caps come in the box as well. You still need to supply the wax ring or gasket, closet bolts, and the supply line, since those are not part of the fixture.
3) Is the Champion 4 elongated toilet a good choice for high-traffic or problem bathrooms that keep clogging?
That is what the flush package is aimed at. The Champion 4 uses a 4 inch (102 mm) piston-action Accelerator flush valve, larger than the common 2 or 3 inch valves, feeding a 2-3/8 inch (60 mm) fully glazed trapway. The wide valve dumps the tank fast and the glazed trapway gives waste less to catch on. Property managers replacing repeat-callback toilets in apartments or a rental turnover typically buy on exactly that spec.
4) Does the Champion 4 meet the 1.6 gallon per flush water use limit for new construction?
It flushes 1.6 gpf / 6.0 Lpf, which is the federal maximum for tank-type toilets and the standard spec on most plans and permits. If your job or utility rebate calls for a high-efficiency toilet at 1.28 gpf or less, this one does not qualify and you want a HET model.
5) What is the advantage of a one-piece toilet like the Champion 4 over a two-piece?
No tank-to-bowl seam. The tank and bowl are a single vitreous china casting, so there is no gasket and bolt joint to weep years later and no crevice at the back of the bowl to scrub. It goes in as one unit rather than setting a bowl then bolting a tank on. The trade-off is weight and bulk on the handling side, and if the china cracks you replace the whole fixture instead of a tank. The Champion 4 also carries an EverClean surface that resists stain and odor causing buildup.
6) Is the Champion 4 bowl elongated or round front, and will it fit a small bathroom?
Elongated. An elongated bowl projects roughly two inches further off the wall than a round front, so in a tight powder room or where the door swing or a vanity crowds the fixture, measure your clear floor space before committing. Where there is room, elongated is the more comfortable bowl and is what most commercial and multi-family specs call for.
7) What color does the Champion 4 one-piece toilet come in, and what is the part number I should order?
White is the finish offered, ordered as American Standard part number 2004314.02. The .02 suffix is American Standard's white color code, so if you are matching other fixtures in a building to white china, the number tells you the color is right.
8) Is the flush valve on the Champion 4 adjustable for water level?
No. The 4 inch Accelerator flush valve is a non-adjustable, piston-action design, so there is no setting to dial flush volume up or down. It is factory set to 1.6 gpf and every unit is flush tested at the factory before it ships.
How fast can I get the American Standard 2004314.02 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the American Standard 2004314.02 come with a warranty?
Absolutely. The American Standard 2004314.02 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the American Standard 2004314.02?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the American Standard 2004314.02 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.