American Standard Colony3 10-Inch Rough Toilet Tank Cover - AMS-735235-400

Lid only. The Colony3 735235-400 is a replacement toilet tank cover, so you get the ceramic top that sits on the tank and nothing else. No tank, no flush valve, no fill valve, no trip lever. If yours cracked or walked off, this is the part that puts the fixture back in service without replacing the toilet.

No. This lid is made for the Colony3 10-inch rough-in tank, and a 12-inch rough-in model uses a different tank casting. Rough-in is the distance from the finished wall to the closet bolt centerline, and a 10-inch tank is a different footprint than the standard 12-inch, so the lid will not seat correctly. Check the rough-in on the toilet you are matching before ordering.

Pull the existing lid and look at the underside. American Standard molds the tank number into the china, and the lid has to match the tank it was cast for, not just look similar. This one covers the Colony3 tank in the 10-inch rough-in configuration. Lids are not interchangeable across series, so a Colony3 lid will not sit right on a Cadet or a Champion tank even if the outside dimensions look close.

White only. The orderable part is 735235-400.020, which is American Standard's white finish code. If the other fixtures in the unit are bone or linen, this lid will not match them.

No. This is a tank cover for a gravity tank-type water closet in the Colony3 line. A wall-hung flushometer fixture has no tank at all, so there is nothing for this lid to sit on. You would be looking at a flush valve or diaphragm kit instead.