American Standard Delancey 30 x 19-Inch Cast Iron Undermount Double-Bowl Kitchen Sink - AMS-77DB30190

Plan on a 33 inch minimum sink base cabinet. The Delancey double-bowl measures 30-1/16 x 19-1/8 x 8-7/8 inches overall, so a standard 30 inch base will not take it. If your run is built out in 30 inch cabinets, you'd need to swap the sink base for a 33 or 36 before this one goes in.

Both bowls run 8-7/8 inches deep, and each bowl is 11-11/16 inches wide by 15-3/8 inches front to back. That depth handles a stockpot upright, but the 11-11/16 inch bowl width means a wide roasting pan will likely have to go in on the diagonal or across both bowls. If you regularly wash oversized sheet pans, a single large bowl sink is the better call.

No. The Delancey 30 x 19 cast iron double bowl is built for undermount installation only, so it needs a solid-surface countertop (stone, quartz, solid surface) with a fabricated cutout and reveal. It is not a self-rimming drop-in and should not be set on laminate.

No deck holes. Because it mounts under the counter, the faucet and any accessories (sprayer, soap dispenser, air gap, filtered water) are drilled into the countertop or wall-mounted, not the sink. Get your faucet hole layout to the fabricator before the top is cut.

Yes, plan for it. A cast iron sink of this size is heavy, and an undermount installation puts that weight on the adhesive bond and the cabinet rather than on a rim resting on the counter. Standard practice is a wood or metal support frame or brackets across the sink base carrying the sink from below, with the counter fabricator's clips and epoxy as secondary. Mounting hardware is not part of the sink.

Equal bowls. Both compartments are the same 11-11/16 inches wide, 15-3/8 inches front to back, and 8-7/8 inches deep, so it is a 50/50 split rather than an offset or low-divide arrangement.

One color: Brilliant White, ordered as part number 77DB30190.308. Porcelain enamel over cast iron, so the color is fired into the surface rather than coated on. If you're standardizing a multi-unit or hospitality property on a single white, this is the only finish the model is built in.

Standard 3-1/2 inch kitchen sink openings, one per bowl, which is what US kitchen strainers and disposers are built to. Strainers, a disposer flange, and the continuous waste tailpiece assembly are separate items, so order two drain fittings plus the double-bowl waste kit along with the sink.